Tools / Power Tools
Bosch GOP 18V-28 Professional Cordless Multi-Cutter User Guide
Quick guide for the Bosch GOP 18V-28 Professional cordless multi-cutter. Includes instructions for battery installation, tool changing, depth stop adjustment, sanding sheet selection, and dust extraction setup.
Table of contents
Quick guide from the manual
The Bosch GOP 18V-28 Professional is a cordless multi-cutter designed for sawing, cutting, sanding, and scraping various materials including wood, plastic, plasterboard, and non-ferrous metals. It is ideal for flush-cutting and working near edges.
Device Description
The tool features an oscillating drive system, an SDS lever for tool-free accessory changes, and a worklight. It is compatible with Starlock and StarlockPlus accessories.
Operation
Battery Installation: Slide the charged battery into the base of the tool until it locks securely.
Tool Changing: Open the SDS lever fully to eject the accessory. Position the desired accessory on the tool holder and press it firmly until it locks automatically. Always wear protective gloves when changing tools.
Depth Stop: The depth stop can be used with segment and plunge cut saw blades. Slide it over the tool holder onto the collar and lock it in the desired position.
Sanding: Attach sanding sheets to the sanding plate using the hook-and-loop system. Ensure the holes in the sanding sheet align with the holes in the sanding plate for effective dust extraction.
Dust Extraction
Always connect a dust extraction system when sanding. Remove the accessory and depth stop before mounting the dust extraction system. Secure it with the clamping lever and connect the dust extraction hose to a suitable vacuum cleaner.
Safety
Always remove the battery before performing any maintenance or tool changes. Do not use the tool for wet sanding. Keep hands away from the sawing area and do not reach under the workpiece.
Manufacturer information
Bosch
Practical help
Common problems
Tool stops automatically
The battery is flat or overheated. Switch off the tool, charge the battery, or let it cool down.
Poor sanding performance
Ensure the sanding sheet is not worn out and that the dust extraction holes are not blocked.
Accessory comes loose during operation
Check that the accessory is correctly positioned and securely locked by the SDS lever.
Before use
- Ensure the battery is fully charged.
- Check that the correct accessory is selected for the material.
- Ensure the accessory is securely locked in place.
- If sanding, connect the dust extraction system.
- Check the work area for hidden electrical cables or pipes.
Specs in practice
- No-load speed (n0)
- 8000–20000 min-1, adjustable via the thumbwheel.
- Oscillation angle
- 1.4° to the left and right (2.8° total).
Model compatibility
- Compatible with Starlock and StarlockPlus accessories.
- Not compatible with StarlockMax accessories.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.