findmanualpdf.com

Bosch GSR | GSB 18-2-LI Professional Cordless Drill/Driver

Professional cordless drill/driver and impact drill from Bosch, designed for high-performance screwdriving and drilling in wood, metal, ceramics, and plastic. The GSB model also features impact drilling for brick and masonry.

Table of contents

Product Description

The Bosch GSR 18-2-LI and GSB 18-2-LI are professional-grade cordless power tools. The GSR is designed for efficient screwdriving and drilling in wood, metal, ceramics, and plastic. The GSB model includes an additional impact drilling function, making it suitable for drilling in brick, masonry, and stone.

Bosch GSR and GSB 18-2-LI Professional
Bosch GSR and GSB 18-2-LI Professional

Safety Instructions

General Power Tool Safety: Always keep your work area clean and well-lit. Do not operate power tools in explosive atmospheres. Keep children and bystanders away while operating the tool.

Electrical Safety: Ensure the power tool plug matches the outlet. Avoid body contact with earthed or grounded surfaces. Keep tools away from rain or wet conditions.

Personal Safety: Stay alert and use common sense. Wear personal protective equipment, including eye protection. Prevent unintentional starting by ensuring the switch is in the off-position before connecting to a power source or battery.

Battery Tool Use: Recharge only with the charger specified by the manufacturer. Use power tools only with specifically designated battery packs. Protect the battery from heat, fire, water, and moisture to prevent explosion.

Operation

Before any work on the machine (e.g., maintenance, tool change, etc.) as well as during transport and storage, set the rotational direction switch to the center position. The battery is supplied partially charged; charge it fully before the first use. Always ensure the tool is switched off before applying it to a screw. Adjust the gear switch only when the machine is at a complete stop.

Gear selection
Gear selection
Battery removal and insertion
Battery removal and insertion

Maintenance and Cleaning

For safe and proper working, always keep the machine and ventilation slots clean. Clean the application tool, the tool holder, and the power tool's ventilation slots after each use.

Troubleshooting

If the tool jams, switch it off immediately. Be prepared for high reaction torque that can cause kickback. Ensure the workpiece is secured with clamping devices or a vice for safer operation.

Disposal

Power tools, batteries, accessories, and packaging should be sorted for environmentally friendly recycling. Do not dispose of power tools and batteries in household waste.

Related manuals

Related manuals from the same brand or category.

Manual page author

Emily Carter

User documentation editor

Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.