Bosch GWS 12V-76 Professional Angle Grinder User Guide

Quick guide from the manual

The Bosch GWS 12V-76 is a cordless angle grinder designed for cutting metal, stone, plastic, composite materials, and wood, as well as for roughing metal without water. Always use the correct protective guard for the specific application.

Safety instructions

• Always wear safety goggles.
• Ensure the protective guard is securely attached and adjusted for maximum safety.
• Do not use damaged accessories; inspect them before each use.
• Maintain a firm grip and proper body position to resist kickback forces.
• Use the tool only for its intended purpose; do not use it for sanding, wire brushing, or polishing.

Assembly

Before any work on the tool (maintenance, tool change, etc.), remove the battery. To mount the protective guard, insert the cutting guard (10) onto the grinding guard (7) until it clicks. To mount abrasive tools, clean the grinding spindle (8), push the spindle lock button (2) forward, and turn the tool to lock the spindle. Use the hex key (13) to secure the clamping bolt with washer (11).

Operation

To start the tool, push the on/off switch (3) forward. To lock it, push the switch forward and down until it clicks. To switch off, release the switch or press it briefly backward and down. If the tool becomes electrostatically charged, the electronics will switch it off; press the switch again to restart.

Maintenance and cleaning

Always keep the tool and ventilation slots clean for safe operation. Remove the battery before any maintenance work.