User manual for EDM 07683 deep fryer

Quick guide from the manual

This deep fryer is designed for domestic use only. Before using the appliance, ensure it is placed on a flat, stable, and heat-resistant surface. Maintain a clearance of at least 30 cm on all sides to ensure proper airflow and safety. Never operate the device without oil, and do not exceed the MAX level mark to prevent oil from boiling over and causing burns.

Parts of the device

• Safety switch
• Thermostat
• Heat lamp (Red)
• On/off light (Green)
• Lid
• Oil container
• Cold metal basket
• Housing
• Reset button

Operation

Before the first use, remove all packaging materials. Ensure the device is unplugged and the selector is in the OFF position. Place the fryer on a stable surface. Fill the container with oil, ensuring it does not exceed the MAX level.

To start frying:

1. Plug the device into a grounded outlet.
2. Select the desired temperature by turning the thermostat dial clockwise. The red heat lamp will turn on.
3. Wait for the oil to heat up; the red light will turn off when the target temperature is reached.
4. Carefully lower the food into the oil.
5. After frying, lift the basket and let the excess oil drain.
6. Once finished, turn the selector to the OFF position and unplug the device.

Warning: If frying a large amount of food, the oil temperature will drop. It is recommended to fry in small quantities, especially when using frozen pre-fried products.

Cleaning

Always ensure the fryer is unplugged and the oil has cooled to room temperature before cleaning.

• Do not use aggressive cleaning products or metallic sponges that can scratch the surface.
• The control/heating unit must never be immersed in water. Wipe it with a damp cloth and dry thoroughly.
• The basket can be removed for cleaning.
• Remove oil carefully, cleaning any residue from the bottom of the container.
• Reassemble only when all parts are completely dry.

Maintenance

The fryer does not require special maintenance, but observe the following:

• Do not leave the appliance unattended while in operation.
• If the device overheats, the safety system will turn it off. To restart, unplug the device, let it cool down, and press the Reset button located on the back of the control area using a thin, long tool.
• If not using the fryer for a long period, apply a thin layer of oil to the interior surface of the container to prevent rust.
• Do not use margarine, butter, or bacon.