Furniture / Home Furnishing
Assembly Instructions for Home Decorators Collection Sturgess 61 Inch Open Shelf Double Vanity
Quick assembly and maintenance guide for the Sturgess 61-inch double vanity. Includes installation steps, safety warnings, and care instructions for stone countertops.
Table of contents
Manual images
Jump to the sectionQuick guide from the manual
This document provides assembly and maintenance instructions for the Sturgess 61-inch open shelf double vanity. Key requirements include ensuring the floor is level before installation to prevent cabinet twisting and using non-abrasive cleaners on the stone surface. For missing parts or technical support, contact Home Decorators Collection Customer Service at 1-800-998-7021.
Pre-assembly and planning
Before beginning, ensure you have the necessary tools: safety goggles, sealant, and a level. If replacing an old vanity, turn off the water supply, disconnect supply lines, and remove the old unit. Check the floor and wall for unevenness; repair high spots or shim low spots to ensure the vanity sits level.
Assembly
- Position vanity: Place the vanity with top (A) in the desired location. Ensure it is flush against the wall and adjust the leg levelers until the unit is perfectly level.
- Apply backsplash sealant: Clean the backsplash (B) of debris. Apply thin beads of clear silicone sealant (not included) to the unpolished back and bottom edges of the backsplash.
- Install the backsplash: Press the backsplash (B) gently against the wall and down onto the vanity top (A). Wipe away any excess sealant immediately.
Care and cleaning
Countertop: Rinse with clean, hot water. Blot spills immediately using mild soap and warm water. Avoid harsh bathroom or grout cleaners. Oil-based stains can be treated with acetone or mineral spirits; organic stains (coffee, tea) may be removed with hydrogen peroxide mixed with a few drops of ammonia. Reapply a penetrating non-toxic sealer periodically based on usage.
Cabinet: Dust frequently with a soft, dry cloth. Clean spills by blotting rather than wiping to prevent white spots. Rub in the direction of the grain using recommended furniture polish. Avoid silicone-based cleaners and waxes.
Safety and warnings
- Adult assembly is required.
- Do not stand, step, or climb on the unit.
- The product is designed to hold a maximum of 50 lbs.
- Keep small parts away from children during assembly to prevent choking hazards.
- Do not overtighten screws or bolts.
Manufacturer information
Home Decorators Collection
Practical help
Common problems
Vanity doors rub against another surface.
The floor is likely not level. Adjust the leg levelers to ensure the vanity is level, then adjust the door hinges.
Uneven gap between doors and cabinet.
The floor is likely not level. Adjust the leg levelers to ensure the vanity is level, then adjust the door hinges.
Before use
- Verify all parts are present in the carton.
- Ensure the installation surface (floor/wall) is level.
- Turn off water supply and disconnect old supply lines.
- Have safety goggles, sealant, and a level ready.
- Check for any loose parts that may have shifted during shipping.
Specs in practice
- Weight capacity
- The vanity is designed to hold a maximum of 50 lbs.
Images and diagrams
- The manual includes diagrams for positioning the vanity against the wall.
- A specific diagram illustrates the application of sealant beads to the back and bottom edges of the backsplash.
- A final diagram shows the correct placement of the backsplash onto the vanity top.
Model compatibility
- Designed for use on flat, level surfaces only.
- Not intended for industrial, commercial, or business usage (limited to 5-year warranty for such use).
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.