Furniture / Home Furnishing
Installation Guide for The Home Depot 1 Drawer Bedside Table
A comprehensive assembly guide for the 1 Drawer Bedside table, including hardware identification, step-by-step construction, and safety anchoring instructions.
Table of contents
Quick guide from the manual
This document provides assembly instructions for the 1 Drawer Bedside table. The estimated assembly time is 30 minutes. Ensure all hardware is accounted for before discarding packaging. The unit must be square when attaching the back panel for structural integrity. Wall anchoring is required for safety.
Tools required
- Phillips screwdriver (medium & large)
- Small hammer
- Ruler/tape measure
- Eye protection (recommended when using a hammer or glue)
Assembly steps
- Drawer Runners: Attach runners (G and H) to side panels (02 and 03) using screws (E).
- Main Frame: Insert dowels (A) and cam bolts (L) into panels. Connect panels (01, 05, 06, 07) using screws (D) and cam locks (K).
- Back Panel: Attach the back panel (04) using nails (F). Ensure the cabinet is square before nailing.
- Drawer Construction: Assemble drawer sides (09, 10), back (11), and base (12) using screws (B) and dowels (A). Attach the handle (M).
- Final Assembly: Secure the drawer runners (C) to the drawer assembly.
Safety and wall anchoring
To prevent tipping, the furniture must be anchored to the wall. Position the unit, mark the wall, drill a hole, and secure the provided wall strap (I) using the washer (J) and screw (B).
Manufacturer information
The Home Depot
Practical help
Common problems
Cabinet is not stable or square
Ensure the cabinet is perfectly square before nailing the back panel; the back panel provides essential structural strength.
Difficulty inserting drawer
Check that the drawer runners are installed flush and that the wheels are correctly aligned on the tracks.
Before use
- Verify all hardware (A-M) is present using the provided ruler guide.
- Ensure you have a medium and large Phillips screwdriver.
- Clear a workspace on a soft surface (like a rug) to prevent scratching.
- Check the wall for hidden pipes or cables before drilling for the anchor strap.
Specs in practice
- 8x30mm Dowels
- Used for aligning and joining wooden panels.
- 300mm Runners
- Standard length drawer slides for this model.
Images and diagrams
- The manual uses numbered parts (01-12) and lettered hardware (A-M) to identify components.
- Arrows in diagrams indicate the direction of insertion or movement.
- The 'X' symbol in diagrams indicates incorrect assembly methods to avoid.
Model compatibility
- The included wall strap is designed for standard wall mounting; ensure the wall material is suitable for the provided screw.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.