horizont trapper Fence Voltmeter 6 Light (14494C)

Product Overview

The horizont trapper Fence Voltmeter 6 Light (Type 14494C) is a professional tool designed for measuring the voltage of electric fence systems. It allows for quick checks at any point along the fence line or directly at the energizer output. The device is completely battery-free, making it maintenance-free and always ready for use.

Voltage Measurement

To measure the voltage, connect the device between the earth (using the integrated earth stake) and the fence wire (using the contact eye). According to VDE standards, voltage values above 2,000 volts are considered safe and effective. Higher voltage readings indicate a more secure and better-functioning fence system.

Troubleshooting and Maintenance

The fence tester is an essential tool for identifying common fence issues:

• Voltage at the ground stake: If the tester detects voltage at the ground stake, it indicates reverse currents caused by leaks or discharges on the fence line. This issue must be addressed by clearing vegetation or debris touching the fence. Grounding can be further improved by adding additional ground piles.
• Faulty insulation: If the fence voltage is low or absent, it may indicate a defective insulator causing a current discharge through the fence post. The tester helps pinpoint these areas of leakage.

Performance Indicators

The device provides a clear visual indication of fence performance based on the measured voltage:

• > 10,000 - 6,000 V: Very good
• 6,000 - 4,000 V: Good
• 4,000 - 2,000 V: Sufficient
• Low kV: Too low (indicates a fault or poor system performance)