Home Appliances / Vacuum Cleaners
Ibell 120YB Vacuum Cleaner Instruction Manual
Quick guide for the Ibell 120YB vacuum cleaner, covering setup, wet and dry operation, filter maintenance, and safety precautions.
Table of contents
Manual images
Jump to the sectionQuick guide from the manual
The Ibell 120YB is a wet and dry vacuum cleaner designed for versatile cleaning tasks. Key operations include proper filter selection based on the cleaning type (liquid vs. dust) and ensuring the unit is used on a stable surface. Always verify that your local power supply matches the rating label before use.
Structure and parts
The unit consists of a waterproof switch, handle, top cover, barrel cap, plastic clips, plastic barrel, base with wheels, suction mouth, plastic hose, and plastic tubes. Accessories include various brushes and nozzles for specific surfaces like carpets, bookshelves, and crevices.
Operation method
To connect the hose, insert the connector into the air inlet until it is tightly fastened. To remove, press the connector button. For wet cleaning, install the sponge filter. For dry cleaning, install the HEPA filter. Once the filter is installed, lock the top cover onto the barrel. The blowing function is activated by inserting the hose connector into the blowing mouth.
Safety instructions
- Do not use in areas with combustible or explosive materials.
- Do not block the air inlet, as this may cause the motor to overheat.
- Do not collect burning cigarettes, gasoline, sharp objects, or fine powders like graphite or gesso that can clog filters.
- Do not overturn the machine; if water enters the motor, it will cause damage.
- Keep the unit away from direct sunlight and high temperatures.
- Always turn off and unplug the machine after use or before maintenance.
Maintenance
To clean the barrel, unfasten the locking clips, lift the top cover, and remove the filters. Wash filters in clean, warm water (max 40°C) if necessary. Allow them to dry completely for 24 hours before reinstalling. Clean the barrel exterior with a damp cloth; do not immerse the barrel cap in water.
Protective device
The machine features a safety valve. If the barrel is full of water, suction will stop and the motor will run at high speed. Turn off the power immediately, empty the barrel, and restart the unit.
Manufacturer information
iBELL Home Appliances
Practical help
Common problems
Loss of suction power
Check if the barrel is full of dust or water, or if the filter is clogged. Clean the barrel and wash/dry the filters.
Motor makes high-pitched noise
The safety valve has triggered because the barrel is full. Turn off the machine, empty the liquid, and restart.
Machine does not start
Ensure the plug is securely inserted into the power socket and the switch is in the 'I' position.
Before use
- Verify local power supply matches the rating label.
- Ensure the correct filter is installed (sponge for wet, HEPA for dry).
- Check that the top cover is securely locked with plastic clips.
- Ensure the hose is firmly connected to the air inlet.
- Check that the base wheels are assembled tightly.
Images and diagrams
- The hose connects to the main air inlet for vacuuming or the blowing mouth for the blower function.
- The sliding block on the handle allows for manual airflow adjustment.
- The safety valve is located under the motor base to prevent water ingress.
Model compatibility
- Use sponge filter for liquid cleaning.
- Use HEPA filter for dry dust cleaning.
- Do not use the machine as a water pump.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.