Furniture / Home Furnishing
IKEA UTRUSTA 140cm Pull-out Corner Unit Assembly Guide
A comprehensive assembly and installation guide for the IKEA UTRUSTA 140cm pull-out corner unit, including component lists, step-by-step mounting instructions, and weight capacity limits.
Table of contents
Manual images
Jump to the sectionQuick guide from the manual
This document provides assembly instructions for the IKEA UTRUSTA 140cm pull-out corner unit. It covers the installation of the pull-out mechanism into a corner cabinet. Ensure you have all components listed before starting. Do not use power tools for assembly to avoid damaging the furniture. If you encounter difficulties, contact IKEA customer service.
Components
The kit includes:
- 24x support clips (10124259)
- 16x screws (100325)
- 24x screws (10126361)
- 4x connectors (10127257)
- 4x base mounts (10127301)
Installation
The installation process involves mounting the base supports to the cabinet walls, assembling the pull-out shelves, and attaching them to the mechanism.
- Cabinet Preparation: Mark the positions for the base mounts (10127301) on the cabinet interior walls according to the specific hole pattern for your cabinet configuration. Secure the mounts using the provided screws (100325).
- Mechanism Setup: Attach the support arms to the base mounts. Ensure they are correctly oriented to allow for smooth movement.
- Shelf Assembly: Assemble the shelf frame by connecting the wire sections using the connectors (10127257). Attach the support clips (10124259) around the perimeter of the shelf.
- Final Mounting: Secure the shelf base to the frame using the screws (10126361). Once assembled, align the shelves with the pull-out mechanism arms and press down firmly to lock them into place.
Safety and Usage
The maximum weight capacity for each shelf is 20 kg (44 lb). Distribute weight evenly to ensure the longevity of the pull-out mechanism.
Manufacturer information
IKEA
Practical help
Common problems
Shelf does not slide smoothly
Check if the base mounts are perfectly aligned and that the shelf is fully locked onto the mechanism arms.
Difficulty securing screws
Ensure you are using a manual screwdriver. Power tools may strip the holes or damage the particle board.
Before use
- Verify all 24 support clips and 4 base mounts are present.
- Ensure the cabinet is stable and level before installation.
- Check that you have a manual screwdriver (do not use power tools).
- Confirm the cabinet interior is clean and clear of debris.
Specs in practice
- Max load per shelf
- 20 kg (44 lb) - Do not exceed this limit to prevent damage to the mechanism.
Images and diagrams
- The manual uses numbered steps (1-8) to illustrate the sequence of mounting the base, assembling the shelf frame, and attaching the shelves to the cabinet.
- Icons indicate where to use specific screws and how to orient the support arms.
Model compatibility
- Designed for specific IKEA corner cabinet configurations.
- Requires UTRUSTA 95-degree hinges for proper door clearance.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.