Philips Doris 17W Balance LED Bathroom Ceiling Light

Product Overview

The Philips Doris 17W Balance LED is a high-quality ceiling light designed specifically for bathroom environments. With an IP44 rating, it provides protection against splashing water, making it suitable for damp areas. The fixture features integrated LED technology, ensuring energy efficiency and long-lasting performance.

Safety Information

Before beginning any installation work, ensure that the main power supply is switched off at the circuit breaker. This device must be installed by a qualified electrician in accordance with local electrical regulations. The luminaire is designed for indoor use only and must be properly grounded.

Installation Instructions

Follow these steps to install your ceiling light:

• Ensure the power is turned off at the mains.
• Remove the diffuser cover from the base of the light fixture.
• Mark the mounting holes on the ceiling and drill as required.
• Secure the base plate to the ceiling using appropriate screws and wall plugs.
• Connect the electrical supply wires to the terminal block, ensuring correct polarity: L (Live), N (Neutral), and the Earth symbol for grounding.
• Ensure all connections are tight and no loose wires are exposed.
• Reattach the diffuser cover by rotating it into the locked position.
• Restore power at the circuit breaker to test the light.

Maintenance and Care

The LED light source is integrated and not intended for user replacement. To clean the fixture, use a soft, dry cloth. Do not use abrasive cleaners or chemicals, as these may damage the surface finish. Ensure the power is off before cleaning.

Troubleshooting and Disposal

If the light fails to turn on, check the circuit breaker and ensure all electrical connections are secure. If the issue persists, contact a professional electrician. This product contains electronic components and should not be disposed of with household waste. Please follow local regulations for the recycling of electrical and electronic equipment.