SilverCrest 10,000mAh Power Bank SPPD 10000 A1 User Guide

Quick guide from the manual

This document provides essential information for the safe and correct use of the SilverCrest 10,000mAh Power Bank (SPPD 10000 A1). Always read the full safety instructions before first use.

Device description

The power bank features:

• USB type A output 1 (orange marking)
• USB type C input/output port
• Micro-USB input
• USB type A output 2
• ON/OFF button
• LED battery capacity indicator

Charging the power bank

The internal battery must be fully charged before first use. Use a power supply with 5V output and at least 3A current. Do not charge via a PC or notebook.

1. Connect the USB type C cable to the power bank's USB type C input port.
2. Connect the other end (USB type A) to a suitable USB power supply.
3. The LED indicator shows the charge level (0-100%).

Charging mobile devices

You can charge up to three devices simultaneously. If all outputs are used, the total output current must not exceed 3A.

1. Connect your device's charging cable to one of the three USB outputs.
2. Connect the other end to your mobile device. Charging starts automatically.
3. If charging does not start, press the ON/OFF button briefly.

Troubleshooting

• Power bank not charging: Ensure proper connection and use a 5V/3A power supply.
• Device not charging: Check connections, press the ON/OFF button, or verify if the device's power consumption is compatible (minimum output current is approx. 60mA).
• Power bank unresponsive: Internal overcurrent protection may be active. Reduce the number of connected devices and press the ON/OFF button.

Cleaning and storage

Clean only with a slightly damp cloth and mild detergent. Store in a dry, dust-free place away from direct sunlight. If stored for a long time, charge the battery regularly to maintain its lifespan.