SLV 1-Phase Track System Luminaire

Quick Guide

This luminaire is designed for use with SLV 1-Phase Track Systems. The installation involves inserting the adapter into the track and locking it using the rotary knob. If using halogen lamps, the luminaire must be installed at a minimum height of 2.50 meters.

Safety Instructions

Failure to follow these instructions may lead to danger of life, burning, or fire. Please observe the following:

• Do not alter or modify the product.
• Do not fasten anything to the product.
• Do not cover the product.
• If a malfunction or damage is suspected, take the product out of service and contact your dealer or a qualified electrician.
• Ensure children are not harmed by the product.
• Maintain a minimum distance of 0.5 meters between the light source and the illuminated surface.

Installation

Before starting, disconnect the complete system from the power supply.

1. Ensure the track system is compatible and the power is off.
2. Turn the adapter knob to the OFF position.
3. Insert the adapter into the track.
4. Turn the adapter knob to the ON position to lock it in place.
5. Check for secure fixation and proper function.

Note: When attaching luminaires, pay attention to the admissible mechanical load of the tracks. Do not use force when inserting the adapter.

Lamp Replacement

Before replacing the lamp, disconnect the luminaire from the mains and allow it to cool down. Use only approved light sources: QPAR51, GU10, 50W max.

Maintenance and Storage

• Disconnect the product from the mains and allow it to cool down before cleaning.
• Clean external surfaces regularly with a slightly moistened (water) cloth.
• Store the product only in a dry and clean condition.

Technical Specifications

• Compatible System: SLV 1-Phase Track System
• Safety Class: II (2) - Safety insulated, connection without protective conductor
• Light Source: QPAR51, GU10, 50W max.
• Operating Environment: Dry indoor areas only