findmanualpdf.com

Tommee Tippee No Knock Cup 190ml User Guide

Quick guide for the Tommee Tippee No Knock Cup 190ml, covering proper cleaning, maintenance of the Clevergrip base, and tips for effective use to prevent spills.

Table of contents

Quick guide from the manual

The Tommee Tippee No Knock Cup is designed to stay upright on smooth, flat surfaces while remaining easy to lift vertically. This guide covers the essential cleaning and maintenance required to keep the Clevergrip base functioning correctly. Always supervise children during use and inspect the cup for damage before each feeding.

Cleaning and sterilization

Proper maintenance is crucial for the Clevergrip base to maintain its suction properties:

  • Wash the cup in warm soapy water and rinse thoroughly after every use.
  • The Clevergrip base must be hand-washed; it is not dishwasher safe.
  • To remove the base, place your palm across it and rotate anti-clockwise.
  • If sterilizing, use cold water sterilization only. Do not use boiling, steam, or microwave sterilization methods.
  • Avoid contact with oil-based foods (e.g., tomato or oil-based sauces) as they may stain the product.

Using your No Knock Cup

The cup works best on dry, smooth, flat, and solid surfaces like tables or high chairs. It will not function effectively on tablecloths, fabric, or surfaces with deep wood grain. Always ensure the surface is dry before placing the cup down.

Troubleshooting and maintenance

If the cup is not gripping the surface or is sticking too much, follow these steps to clean the base:

  1. Remove the base by rotating it anti-clockwise.
  2. Rinse thoroughly under a tap, ensuring water flows into the small center hole.
  3. Gently lift the edge of the silicone skirt (do not pull) and run water underneath it.
  4. Rinse the four holes in the solid part of the base.
  5. Shake off excess water and wipe dry before reassembling.

If the cup is sticking too much, ensure the base is completely dry and has not been put in the dishwasher. To release a stuck cup, slide it to the edge of the surface or tilt it while pressing your thumb on the silicone skirt to break the seal.

Safety warnings

  • Do not use with hot liquids.
  • Always check the temperature of the contents before feeding.
  • Keep unused components out of reach of children.
  • Do not store in direct sunlight or near heat sources.
  • Discard the product at the first sign of damage or weakness.

Practical help

Common problems

Cup is not gripping the surface

The Clevergrip base may have dust or dirt trapped inside. Remove the base, rinse the center hole and under the silicone skirt, then dry thoroughly.

Cup is sticking too much to the surface

Ensure the base is completely dry and was not washed in a dishwasher. Slide the cup to the edge of the surface or tilt it while pressing your thumb on the silicone skirt to break the seal.

Before use

  • Inspect the cup for any signs of damage or weakness.
  • Ensure the Clevergrip base is clean and completely dry.
  • Verify the surface you are placing the cup on is dry, smooth, flat, and solid.
  • Check the temperature of the liquid before feeding.
  • Test the grip by placing the empty cup on the surface and gently tapping the sides.

Specs in practice

Max fill line
Do not exceed this level when filling the cup to ensure proper function and prevent spills.
Clevergrip base
The specialized bottom component that provides suction on flat surfaces. Must be hand-washed only.

Model compatibility

  • Not suitable for use in a conventional oven, microwave, or any heating device.
  • Does not work on tablecloths, fabric, or surfaces with deep wood grain.
  • Not suitable for sterilization by boiling, steam, or microwave.

Manual page author

David Miller

Documentation analyst

Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.