WMF Skyline 1.6L Electric Water Kettle

Product Overview

The WMF Skyline 1.6L electric water kettle is a high-quality kitchen appliance designed for household use. It features a stainless steel body, a mesh filter in the spout to retain limescale, and a base with integrated cable storage. The kettle is equipped with an automatic boiling stop function and a safety system that prevents overheating if the device is accidentally switched on without water.

Safety Instructions

Important: This appliance can be used by children aged 8 and older and persons with reduced physical, sensory, or mental capabilities if supervised or instructed in safe use. Keep the device and its cable out of reach of children under 8 years old. Only operate the kettle with its original base. Do not immerse the pot or base in water. Ensure the lid is closed during operation to prevent boiling water from splashing. The exterior surfaces can become very hot; always use the handle.

Start-up and Operation

Before first use, clean the interior thoroughly. Fill the kettle with water between the minimum level and the maximum mark. Close the lid securely to ensure the automatic boiling stop works reliably. Place the kettle on the base and press the ON switch located under the handle. Do not use the water from the first boiling cycle for food preparation.

Cleaning and Maintenance

Always disconnect the power plug and allow the kettle to cool down before cleaning. Wipe the exterior with a damp cloth and a mild detergent; do not use abrasive cleaners. The mesh filter in the spout can be removed for cleaning by pressing the top lug upwards. If rust stains appear on the stainless steel, these are usually surface deposits that can be removed with a stainless steel cleaner.

Descaling

Regularly descale the appliance using a high-quality commercial descaling agent. Follow the manufacturer's instructions, ensuring the agent is suitable for the device and does not contain substances like pure vinegar or citric acid that could damage seals. Always perform a final cleaning cycle with clear water after descaling.