Documents / Warranty Safety
Safety Information and Regulatory Compliance for Xiaomi 11T
A comprehensive guide to safety information, RF exposure (SAR) limits, and regulatory compliance for the Xiaomi 11T smartphone, including technical specifications for the included power adapter.
Table of contents
Quick guide from the manual
This document provides essential safety, regulatory, and compliance information for the Xiaomi 11T (Model: 21081111RG). It covers EU and FCC regulations, RF exposure limits (SAR), and technical specifications for the included power adapter. Always ensure the device is used in accordance with these guidelines to maintain safety and regulatory compliance.
RF Exposure Information (SAR)
The device complies with Specific Absorption Rate (SAR) limits for general population/uncontrolled exposure. SAR testing was conducted at the highest certified power level in all frequency bands.
- Head SAR: 0.554 W/kg
- Body SAR: 0.954 W/kg (at 5 mm distance)
- FCC SAR Limit: 1.6 W/kg
- EU SAR Limit (10g): 2.0 W/kg
For body-worn operation, maintain a minimum separation distance of 5 mm (EU) or 1.5 cm (FCC) from the body. Avoid using accessories containing metal components, as these have not been tested for RF exposure compliance.
Regulatory Compliance
The device complies with the essential requirements of the RE Directive 2014/53/EU and Part 15 of the FCC Rules. Operation is subject to the condition that the device does not cause harmful interference and must accept any interference received. The full EU declaration of conformity is available at www.mi.com/en/certification.
Technical Specifications: Power Adapter
The included power adapter (Model: MDY-12-EH) has the following specifications:
- Input Voltage: 100-240 V~
- Input Frequency: 50/60 Hz
- Output Voltage: 5.0 V / 5.0 - 20.0 V
- Output Current: 3.0 A / 6.2 - 3.25 A
- Output Power: 15.0 W / 67.0 W Max
- Average Active Efficiency: ≥82.0%
E-label
To access the electronic label for certification information, go to Settings > About phone > Certification, or open Settings and type 'Certification' into the search bar.
Official resources from the manual
Manufacturer information
Xiaomi Corporation
Practical help
Common problems
Interference with radio or television reception
Reorient or relocate the receiving antenna, increase the separation between the equipment and receiver, or connect the equipment to a different circuit outlet.
Before use
- Ensure the device is kept at least 5 mm (EU) or 1.5 cm (FCC) away from the body when worn.
- Use only non-metallic belt clips or holsters for body-worn operation.
- Use shielded cables to ensure compliance with FCC Class B limits.
- Check the E-label in Settings for specific certification details.
Specs in practice
- SAR (Specific Absorption Rate)
- A measure of the rate at which energy is absorbed by the human body when exposed to a radio frequency (RF) electromagnetic field.
- Output Power (Adapter)
- The maximum power the charger can deliver, up to 67.0 W for this model.
Model compatibility
- The device is designed for use in EU areas with specific frequency bands.
- Accessories containing metal have not been tested for RF exposure compliance and should be avoided.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.