User Manual for Amazon Basics Power Strip Tower

Quick guide from the manual

This power strip tower is designed for indoor use only. It supports a maximum load of 1875W. Ensure all packaging is removed before use. The device features a built-in circuit breaker to protect against overloads.

Intended use

This product is intended to power up to 12 devices with a maximum load of 1875W. It is designed for dry indoor areas only and is not intended for commercial use.

Operation

To use the power strip, connect the power cord to a suitable power outlet and switch the product on. The power indicator light will illuminate.

USB Charging: Up to 3 USB devices can be charged simultaneously. The total current output for the USB ports is 3.4A. If the total current consumption of the devices exceeds 3.4A, the available current for each device depends on its battery capacity.

Circuit breaker

If the circuit breaker trips, follow these steps:

1. Unplug all connected devices and appliances.
2. Switch the product off, then switch it back on.
3. Connect the devices and appliances. Do not connect the device or appliance that caused the circuit breaker to trip. Do not exceed a total load of 1875W.

Cleaning and storage

Cleaning: Always unplug the product before cleaning. Wipe the product with a soft, slightly damp cloth. Do not use corrosive detergents, wire brushes, abrasive scourers, metal, or sharp utensils to clean the product. Do not immerse the product in water or other liquids.

Storage: Store the product in its original packaging in a dry area, away from children and pets.

Specifications

• Rated voltage: 125V AC, 15A, 60Hz
• Maximum power output: 1875W
• Number of AC outlets: 9 (grounded)
• Cord length: 6' (1.83m)
• USB output: 3.4A total
• Surge energy rating: 1080J
• Protection class: Class I