Amazon Basics FCP2 Compressor Guitar Pedal User Guide

Quick guide from the manual

This document provides essential instructions for the Amazon Basics FCP2 Compressor Guitar Pedal. It is intended for modifying the sound and volume of electric guitars or basses in private, dry indoor environments. Always ensure the power supply matches the required 9V 300mA specification.

Product Description

The pedal features three main control knobs and an on/off switch:

• LEVEL knob: Adjusts the volume of the signal.
• ATTACK knob: Sets the attack time of the compression effect.
• SUSTAIN knob: Sets the compression ratio to suppress loud notes.
• Input/Output jacks: 1/4 inch (6.35 mm) connectors for instrument and amplifier.

Connecting to power supply

The device requires a 9V 300mA power adapter (not provided). To connect:

1. Connect the adapter to the power socket on the pedal.
2. Connect the adapter to a suitable wall outlet.

Switching on/off

1. Connect the pedal to your instrument and amplifier before switching it on.
2. Set the volume controls on your instrument/amplifier to the desired level.
3. Press the On/Off switch to activate or deactivate the pedal.
4. The indicator light will show the current status.
5. Adjust the knobs to achieve the desired sound.

Cleaning and Storage

Warning: Risk of electric shock. Unplug the product before cleaning and never immerse it in water or other liquids.

• Clean the product using a soft, dry cloth.
• Do not use corrosive detergents, wire brushes, or abrasive scourers.
• Store in the original packaging in a dry area, away from children and pets.

Safety

Do not use the product near water or heat sources. Be aware that high volume levels through headphones or speakers can cause permanent hearing loss. If the product is damaged, spilled on, or dropped, refer all servicing to qualified personnel.