Anko 16D2P Flame Effect Fireplace Heater

Product Overview

The Anko 16D2P Flame Effect Fireplace Heater is designed for indoor household use. It features an adjustable thermostat, dual heating settings, and a realistic flame effect. The unit is equipped with a thermal safety cut-out and a tip-over safety switch for enhanced protection.

Technical Specifications

• Power Supply: AC 220-240V ~ 50Hz
• Power Consumption: 1800W
• Heating Settings: 900W (Half power) / 1800W (Full power)

Safety Guidelines

Your safety is paramount. Please adhere to the following precautions:

• Keep all objects at least 1 metre away from the front, sides, and rear of the heater.
• Do not cover the appliance, as this poses a fire risk.
• Do not use the heater on long-pile carpets or flokati rugs; use a heat board if necessary.
• Ensure the appliance is placed on a flat, stable, and heat-resistant surface.
• Do not use the heater near bathrooms, showers, swimming pools, or areas where flammable liquids are stored.
• Never leave the appliance unattended while in use.
• Do not use extension cords, power boards, or double adaptors. Plug the unit directly into a fixed wall outlet.

Assembly

Before use, the feet must be attached to the base of the heater. Place the heater upside down on a soft surface, align the feet with the pilot holes, and secure them using the provided screws and a Phillips head screwdriver.

Operation

Upon first use, the heater may emit a slight burning smell, which is normal and will dissipate. To operate:

• Plug the unit into a suitable wall outlet.
• Open the control panel cover.
• Turn on the ON/OFF switch to activate the flame effect.
• Use the heating setting switch to select between 900W or 1800W.
• Adjust the thermostat knob to reach the desired room temperature.
• Rotate the flame adjustment knob to control the intensity of the fire effect.

Maintenance and Troubleshooting

Regularly clean the air vents and grills using a vacuum to remove dust and fluff, which can cause overheating. Before cleaning, ensure the unit is switched off, unplugged, and completely cool. Use only a dry, soft cloth for exterior surfaces. Do not use detergents, solvents, or abrasive cleaners. The unit contains no user-serviceable parts; do not attempt to open the casing. If the heater fails to operate, check the power connection or contact customer support.

Disposal

Dispose of the product and its packaging in an environmentally friendly manner in accordance with local council regulations. Do not dispose of these items in standard household waste.