Power / Batteries Chargers
anko D4 10000mAh RGB Light Charging Power Bank
Comprehensive user guide for the anko D4 10000mAh RGB Light Charging Power Bank, covering setup, safety instructions, technical specifications, and maintenance.
Table of contents
Product Overview
The anko D4 10000mAh RGB Light Charging Power Bank is a portable charging solution designed for mobile devices. It features a built-in USB-C cable for convenient charging and an integrated display to monitor power levels. The device also includes an RGB light feature, which adds a visual element to the charging experience. The power bank is compact and designed for daily use, ensuring your devices stay powered while on the go.
Getting Started
Before using the power bank for the first time, ensure it is fully charged. Connect the power bank to a suitable power source using the provided USB-C cable. The display will indicate the current battery level. To turn on the device and activate the RGB light, press and hold the power button. Short presses on the power button allow you to cycle through different RGB light modes, including Red, Purple, Blue, and Green. To charge your mobile device, connect it to one of the available USB-A output ports or use the built-in USB-C cable.
Safety Instructions
Safety is paramount when using lithium-ion battery products. Always keep the power bank away from water, liquids, and wet areas. Do not expose the unit to temperatures exceeding 45 degrees Celsius or place it in direct sunlight, such as on a car dashboard. Avoid dropping, crushing, or puncturing the device, as this can lead to fire or explosion. If the unit shows signs of swelling or damage, discontinue use immediately and dispose of it according to local regulations. Keep the device out of reach of children and ensure it is used under adult supervision.
Maintenance and Storage
To maintain the longevity of the internal battery, it is recommended to charge the power bank at least once every three months if it is not in regular use. For long-term storage, keep the battery level at approximately 50 to 75 percent. Always store the unit in a cool, dry place. Do not attempt to disassemble or repair the power bank yourself, as this will void the warranty and may cause safety hazards. When cleaning the exterior, use a dry cloth; do not use harsh chemicals or abrasive cleaning agents.
Technical Specifications
The power bank features a 10000mAh capacity with a 3.7V Li-ion battery. It supports multiple output options, including USB-A and a built-in USB-C cable, providing a maximum total output of 22.5W. The charging time for the power bank itself is approximately 3 hours. The device includes built-in temperature protection, which will automatically stop charging if the unit overheats during operation.
Manufacturer information
Anko
Practical help
Common problems
Device not charging
Ensure the power bank is charged and the cable is securely connected to both the power bank and your device.
Unit overheating
The power bank has built-in temperature protection and will stop charging automatically. Allow it to cool down before resuming use.
RGB light not changing
Ensure the device is powered on, then use short presses on the power button to cycle through the available light modes.
Before use
- Check for any physical damage to the unit.
- Ensure the power bank is fully charged.
- Keep away from water and high temperatures.
- Ensure children are supervised during use.
Specs in practice
- Total Output
- Maximum 22.5W, representing the fastest charging speed the device can provide.
- Charging Time
- Approximately 3 hours to fully recharge the power bank from empty.
Model compatibility
- Compatible with most mobile phones.
- Built-in USB-C cable is for output only; do not use it to charge the power bank.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.