Power / Batteries Chargers
User Guide for ANKO 18LY56 Sport Bluetooth Earphone
Quick setup and operation guide for the ANKO 18LY56 Sport Bluetooth Earphone, including pairing instructions, playback controls, charging procedures, and troubleshooting tips.
Table of contents
Quick guide from the manual
This document provides essential instructions for the ANKO 18LY56 Sport Bluetooth Earphone. It covers initial setup, Bluetooth pairing, playback controls, and maintenance. Please ensure the device is fully charged before first use.
What is in the box
- Sport Bluetooth Earphone
- Micro-USB Charging Cable
- Ear caps
- Ear hooks
Power On and Off
- Power On: Press and hold the power button for 3 seconds while the device is off. The blue LED will flash 3 times with a tone.
- Power Off: Press and hold the power button for 3 seconds.
Bluetooth Pairing
- Ensure the headphones are powered off.
- Press and hold the power button until the LED flashes red and blue.
- Activate Bluetooth on your mobile device and select 'anko BT earphone' from the list.
- The LED light will turn off once successfully connected.
Playback and Calling
- Play/Pause: Press the power button once.
- Next Track: Press the VOL+ button.
- Previous Track: Press the VOL- button.
- Answer Call: Press the power button once.
- Hang Up: Press the power button once.
- Decline Call: Press and hold the power button for 1 second.
Charging
Connect the micro-USB cable to the earphone's charging port and plug the other end into a computer's USB port or a USB wall charger.
Safety and Warnings
- Working temperature: 0 - 45 degrees Celsius.
- Do not expose the battery to extreme temperatures, low air pressure at high altitudes, or mechanical damage.
- Do not dispose of the battery in fire or a hot oven.
Manufacturer information
Anko
Practical help
Common problems
Headphones will not turn on
Ensure the headphones are fully charged before attempting to turn them on.
Device cannot find the headphones
Check that the headphones are in pairing mode (LED indicator flashing) and that they are within 10 meters of your device.
Headphones disconnect after pairing
Check the battery level and recharge if necessary. Ensure there are no obstructions between the headphones and the device.
Cannot hear anything during a call
Ensure the headphones are connected to your mobile device and not the speakerphone mode.
Before use
- Check that the battery is fully charged.
- Ensure the micro-USB cable is fully seated in the charging port.
- Verify that your mobile device's Bluetooth is enabled.
- Ensure the ear hooks and caps are properly fitted for comfort.
Specs in practice
- Working temperature
- The device must be operated between 0 and 45 degrees Celsius to prevent battery damage.
Model compatibility
- Compatible with standard Bluetooth-enabled mobile devices.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.