Furniture / Home Furnishing
ANKO 1.82M Flocked Slim Pre-Lit Christmas Tree Instruction Manual
Comprehensive assembly, safety, and maintenance guide for the ANKO 1.82M Flocked Slim Pre-Lit Christmas Tree. Includes setup steps, electrical safety warnings, and storage tips.
Table of contents
Product Overview
The ANKO 1.82M Flocked Slim Pre-Lit Christmas Tree is designed for indoor holiday decoration. This pre-lit tree comes with integrated LED lights, providing a convenient and festive solution for your home. The package includes the tree top, upper body section, and a sturdy plastic stand.
Assembly Instructions
To assemble your tree, start by placing the plastic stand on a level surface. Slide the legs upwards into the slots at the base of the trunk until they are firmly secured. Insert the upper body section into the stand, then attach the tree top. Ensure all sections are fitted tightly. Once assembled, open all branches, starting from the tips farthest from the pole. Shape them by moving one to the right, one to the left, and one to the center of the main stem for a full, natural look. Wrap the end tip around the wire near the pole to secure it. Finally, connect the light set to the provided adaptor and plug it into an indoor power outlet, matching the color-coded labels on the plugs.
Safety and Usage Guidelines
This product is intended for indoor use only. Do not place the tree near heaters or other heat sources. Ensure the tree is positioned on surfaces with normal flammability and keep cables away from areas where they could pose a hazard to children or pets. Never cover the lights with items such as curtains or bedding. The LED bulbs are non-replaceable; if the light set or cable is damaged, the entire set must be discarded. Always switch off or unplug the adaptor when the tree is unattended. Do not attempt to connect this tree to another tree or modify the electrical components.
Storage and Maintenance
When the holiday season ends, unplug the adaptor and remove all ornaments. Disassemble the tree by reversing the assembly steps. Do not detach the factory pre-plugged light sets. If you experience difficulty separating the poles, apply a small amount of lubricant to the joint and rotate the poles in both directions. Gently press the branches against the stem before placing the sections back into the box. Store the carton in a cool, dry place, avoiding areas where temperatures exceed 40 degrees Celsius or 90 degrees Fahrenheit.
Manufacturer information
Anko
Practical help
Common problems
Difficulty separating tree poles
Apply a small amount of lubricant to the joint and rotate the upper pole in both directions before lifting.
Damaged light set or cable
The light set must be discarded; do not attempt to repair or replace individual bulbs.
Before use
- Ensure the tree is placed on a level surface.
- Check that all tree sections are firmly connected.
- Verify the power source is an indoor mains socket.
- Confirm the adaptor matches the provided model (JT-DC31V3.6W-H5).
- Ensure the tree is away from heat sources and flammable materials.
- Check that cables are positioned to avoid tripping hazards.
Specs in practice
- System Wattage
- 3.6W total power consumption for the lighting system.
- Adaptor Model
- JT-DC31V3.6W-H5, the only compatible power supply for this LED set.
- Clearance Distance
- Minimum 75mm distance required between the LED driver and combustible building elements.
Images and diagrams
- Step 1: Insert legs into the base stand.
- Step 2: Connect tree sections together.
- Step 3: Shape branches for a natural appearance.
- Step 4: Connect the light set to the power adaptor.
Model compatibility
- Indoor use only.
- Do not interconnect with lighting chains from other manufacturers.
- Use only the supplied adaptor.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.