Power / Wireless Chargers
User Manual for Ansmann 11KW Type 2 EV Charging Cable
Quick guide for the Ansmann 11KW Type 2 EV charging cable. Includes connection steps, safety instructions, technical specifications, and maintenance tips.
Table of contents
Quick Start Guide
The Ansmann 11KW charging cable is designed for charging electric and hybrid vehicles at charging stations. Before use, ensure the product is undamaged and complete, including the storage bag. Always inspect the cable and contacts for dirt or damage before each use.
Safety Instructions
- Do not use if damaged: If the cable shows visible damage, do not use it. It must be repaired by a professional or disposed of properly.
- No modifications: Never use extension cables or adapters. Modifications are dangerous and void the warranty.
- Environmental protection: Connect only to vehicle inlets and charging sockets protected from water, moisture, and direct sunlight.
- Handling: Do not touch with wet hands. Never immerse in water or other liquids.
- Supervision: Keep children away from the product.
- Disconnecting: Never pull plugs out with force to avoid dangerous electric arcs.
Operation
- Switch off the vehicle and set it to parking mode.
- Remove the protective caps from the charging plugs.
- Connect the infrastructure charging plug to the charging station socket and the vehicle charging plug to the vehicle inlet. Ensure the connections are fully and correctly seated.
- Start the charging process at the charging station. The plugs will lock automatically.
- To end charging, follow the instructions provided by the charging station.
- Once charging is finished, the plugs will unlock automatically. Disconnect the plugs from both the station and the vehicle (ensure the vehicle is unlocked).
- Replace the protective caps and roll up the cable without kinks.
Technical Specifications
- Rated power: 11kW
- Output: 16A
- Voltage: 400V AC 50Hz
- Protection class: IP55 (when plugged in)
- Operating temperature: -25°C to +55°C
- Cable type: 5x2.5mm² + 1x0.75mm²
- Plug type: IEC 62196-2 Type 2
Cleaning and Storage
Clean the cable only when it is disconnected from both the vehicle and the power source. Use a dry cloth to clean the cable and contacts. Do not use harsh detergents, water, or steam cleaners. Store the cable in a dry, clean place with the protective caps attached.
Disposal and Warranty
Dispose of the product according to local legal requirements for electronic waste. The product comes with a two-year warranty from the date of purchase. For support, visit ansmann.de or contact the service hotline at +49 (0) 6294 / 4204 3400.
Official resources from the manual
Practical help
Common problems
Charging performance is impaired
Charging performance may be affected by very low or very high temperatures. The charging current is regulated by the vehicle.
Cable or contacts are dirty
Clean only with a dry cloth when the cable is disconnected. Do not use water or harsh detergents.
Cable is damaged
Do not use the cable. Contact your retailer for repair or disposal.
Before use
- Check the charging cable and contacts for damage or dirt.
- Ensure the vehicle is switched off and in parking mode.
- Verify the charging station and vehicle inlet are compatible (Type 2).
- Ensure the charging area is protected from water and direct sunlight.
- Ensure the vehicle is unlocked before disconnecting.
Images and diagrams
- The cable features two Type 2 plugs with protective caps.
- Protective caps must be used when the cable is not connected to prevent damage.
Model compatibility
- Compatible with electric and hybrid vehicles with Type 2 inlets.
- Do not use with extension cables or adapters.
- Charging current is regulated by the vehicle.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.