100-FT Stainless Steel Garden Hose
User manual for the 100-FT Kink-Proof and Puncture-Proof Stainless Steel Garden Hose by AquaJoe, covering assembly, storage, and safety guidelines.
Table of contents
Product Overview
The AquaJoe 100-FT Stainless Steel Garden Hose is designed for durability, featuring a kink-proof and puncture-proof construction. This high-quality hose is built to withstand the rigors of outdoor gardening while remaining flexible and easy to handle. Its stainless steel exterior provides superior resistance to environmental wear and tear compared to traditional rubber or vinyl hoses.
Assembling the Hose
To begin using your garden hose, first remove it from the packaging and ensure it is completely unwound. Before attaching it to your water source, verify that the included rubber washers are firmly seated inside both the female and male connectors. This is crucial for preventing leaks at the connection points. Attach your preferred spray nozzle or irrigation accessory to the water outlet end of the hose. Finally, connect the water inlet end to your home's outdoor faucet and turn on the water supply.

Storage and Maintenance
Proper storage is essential to extending the lifespan of your stainless steel garden hose. You can store the hose on any standard hose reel or simply coil it neatly next to your faucet. It is highly recommended to store the hose out of direct sunlight when not in use. After you have finished watering, always release the water pressure before storing. To do this, shut off the water supply at the faucet and open the nozzle to drain any remaining water from the hose.
Safety Warnings
Please adhere to the following safety guidelines to ensure safe operation:
- This hose is intended for outdoor use only and is not for drinking or potable water.
- Do not use the hose for commercial applications, hot water, or high-pressure systems like pressure washers.
- The hose should be operated at pressures under 80 PSI.
- Keep the hose out of reach of children and pets to avoid potential strangulation hazards.
- Never leave the hose unattended while it is in use or under pressure.
- This product is not a toy and should be handled with care.
Manufacturer information
Aqua Joe
Practical help
Common problems
Ensure the rubber washer is firmly seated inside the female connector.
Before use
- Remove hose from packaging
- Completely unwind the hose
- Check that rubber washers are inside both connectors
- Attach spray nozzle to the outlet
- Connect inlet to the faucet
- Turn on water supply
Specs in practice
- Maximum Pressure
- Must be used in applications under 80 PSI
Images and diagrams
- The diagram illustrates the connection points between the faucet, the female water inlet with a rubber washer, and the male water outlet.
Model compatibility
- Compatible with standard outdoor faucets and common garden hose reels.
- Compatible with standard spray nozzles and irrigation accessories.
- Not compatible with high-pressure systems like pressure washers.
- Not for use with hot water.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.