Bestway 1.07m (42") Inflatable Pool Ladder - User Manual
Official user manual for the Bestway 1.07m (42") pool ladder (Model 58330), covering assembly, safety guidelines, maintenance, and winter storage instructions.
Table of contents
Manual images
Jump to the sectionProduct Overview
The Bestway 1.07m (42") pool ladder (Model 58330) is designed to provide safe access for entering and exiting above-ground pools. It is suitable for pools with a maximum wall height of 1.07m (42") and a maximum wall width of 30cm (11.8"). The ladder has a maximum load capacity of 150kg (330lbs).


Safety Guidelines
Safety is paramount when using the pool ladder. Please adhere to the following rules:
- Only one person should use the ladder at a time.
- Always face the ladder when entering or exiting the pool.
- Secure the ladder when the pool is not in use or when no adult is present to prevent unauthorized access by children.
- Do not dive from the ladder, the pool side, or any nearby objects.
- The ladder should only be placed in the pool when proper adult supervision is present.
- Keep all small parts out of the reach of children.
- The ladder is not a toy; use it with caution.
Assembly and Installation
Assembly requires a crosshead screwdriver and an adjustable wrench. Ensure the ladder is placed on a solid, level base. The ladder features a removable part designed to prevent unsupervised access, though this does not replace the need for competent adult supervision.
Maintenance and Storage
Regular maintenance is essential for safety. Before each use, check all assembly screws, retention clips, and look for any sharp edges or rust. If rust is detected, replace the affected screws or clips immediately. During the off-season (winter months), remove the ladder from the pool, disassemble all components, and dry them thoroughly before storing in a cool, dry place out of the reach of children.
Manufacturer information
Bestway
Practical help
Common problems
Immediately replace the rusted screws or clips before further use.
Before use
- Check that the ladder is on a solid base.
- Inspect all assembly screws and retention clips.
- Check for any sharp edges or splinters.
- Ensure the ladder is clean and dry.
- Verify that the ladder is properly secured if the pool is not in use.
Specs in practice
- Maximum load weight
- 150kg (330lbs) - Do not exceed this weight limit.
- Max wall height
- 1.07m (42") - Designed for pools of this specific height.
- Max wall width
- 30cm (11.8") - Maximum thickness of the pool wall the ladder can accommodate.
Images and diagrams
- Page 16 shows the parts list including screws (M6x43, M6x35) and various frame components.
- Pages 16-21 provide step-by-step assembly instructions for the ladder frame and steps.
- Page 22 displays the overall dimensions of the ladder (1.39m height, 1.07m width, 74cm base width).
Model compatibility
- Designed for above-ground pools with a wall height of 1.07m (42").
- Suitable for pool walls with a maximum width of 30cm (11.8").
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.