Power / Power Supplies
User Manual for Blink Weather Resistant Power Adapter
Quick guide for the Blink Weather Resistant Power Adapter (BAH0410U). Includes safety instructions, installation requirements for outdoor use, technical specifications, and compliance information.
Table of contents
Important Information from the Manual
This document provides essential safety and operational information for the Blink Weather Resistant Power Adapter (Model: BAH0410U). This device is designed for use with compatible Blink products and is rated for outdoor use under specific conditions.
Safety Precautions
Failure to follow these instructions may result in fire, electric shock, or injury. Please observe the following:
- Do not force the adapter into a power outlet.
- Do not expose the adapter, cable, or connectors to liquids, corrosive materials, or salt water.
- Do not install the device while it is raining.
- Do not install the device on hot or metal surfaces that store heat.
- Do not use the adapter if it appears damaged.
- Do not attempt to dry the adapter with external heat sources like microwaves or hair dryers if it gets wet.
- Keep away from children: The cable presents a strangulation hazard, and small parts present a choking hazard.
Installation Requirements
To ensure safe and proper operation, adhere to these installation guidelines:
- Socket Type: Install only into a covered Class A GFCI electrical socket that is weatherproof.
- Accessibility: Ensure the socket is easily accessible and located near the Blink device being powered.
- Mounting: If mounting in elevated locations, take precautions to ensure the device does not fall.
- No On/Off Switch: The device does not have an on/off button. To stop power, unplug the cord.
- Overloading: Do not plug multiple electric devices into the same wall socket to prevent overheating and fire risks.
Product Specifications
- Model Number: BAH0410U
- Input Rating: 100-240Vac, 50/60Hz, 0.35W
- Output Rating: 5.0Vdc, 2.0A, 10.0W
- Operating Temperature: -20°C to 50°C (-4°F to 122°F)
- IP Rating: IP67 (Raintight under specific conditions)
Compliance and Support
This device complies with part 15 of the FCC Rules. For additional safety, compliance, recycling information, or warranty details, please visit the Blink website at https://blinkforhome.com/safety-and-compliance or check the Legal and Compliance section in the Blink app settings. For customer service contact information, visit https://support.blinkforhome.com/.
Official resources from the manual
Practical help
Common problems
Adapter gets wet from immersion or high-pressure water
Carefully disconnect all cables without getting your hands wet. Wait for the device to dry completely before powering it on again. Do not use external heat sources.
Socket overheating
Do not plug multiple electric devices into the same wall socket. Overloading can cause overheating and fire.
Damaged cable or adapter
Discontinue use immediately if the adapter or cable appears damaged, as the waterproofing may be compromised.
Before use
- Ensure the power outlet is a covered Class A GFCI socket.
- Verify the socket is easily accessible and near the Blink device.
- Check that the adapter and cable are free from visible damage.
- Confirm the installation surface is not hot or metal.
- Verify compatibility with your specific Blink device at support.blinkforhome.com/indoor-outdoor-accessories.
Specs in practice
- Input Rating
- 100-240Vac, 50/60Hz - Compatible with standard electrical grids globally.
- Output Rating
- 5.0Vdc, 2.0A, 10.0W - The power delivery capacity for the connected Blink device.
- Operating Temperature
- -20°C to 50°C - The safe ambient temperature range for outdoor operation.
Model compatibility
- Use only with compatible Blink devices.
- Check the accessory detail page at https://support.blinkforhome.com/indoor-outdoor-accessories for specific compatibility.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.