Tools / Power Tools
Bosch UniversalHedgeCut 50/58/60 and AdvancedHedgeCut 65/68/70 Hedge Trimmer User Manual
Quick guide for the Bosch UniversalHedgeCut and AdvancedHedgeCut series hedge trimmers. Includes safety instructions, operation, maintenance, and troubleshooting.
Table of contents
Quick guide from the manual
This document provides essential safety and operating instructions for the Bosch UniversalHedgeCut and AdvancedHedgeCut series hedge trimmers. Always ensure the tool is switched off and the mains plug is disconnected before performing any adjustments, cleaning, or maintenance.
Safety instructions
General Power Tool Safety: Keep your work area clean and well-lit. Do not operate power tools in explosive atmospheres. Keep children and bystanders away while operating the tool.
Electrical Safety: Ensure the plug matches the outlet. Use only approved extension cables suitable for outdoor use. For increased safety, use a Residual Current Device (RCD) with a tripping current of no more than 30 mA.
Hedge Trimmer Safety: Keep all body parts away from the blade. Do not attempt to remove cut material or hold material to be cut while blades are moving. Always carry the hedge trimmer by the handle with the blade stopped. When transporting or storing, always fit the blade cover.
Operation
Switching ON/OFF: To switch on, press and hold the lock-off button (3), then press the On/Off switch (2). To switch off, release the lock-off button (3) and then the On/Off switch (2).
Working with the Hedgecutter: Move the hedgecutter evenly forward along the cutting line. The double-edge cutting blade enables cutting in either direction or with a side-to-side motion. Cut the sides of the hedge first, then the top. For straight sides, cut from bottom to top in the direction of growth.
Maintenance and cleaning
Always disconnect the mains plug before any work on the product. Keep the product and ventilation slots clean for safe operation. Never spray or immerse the product in water. Regularly check for loose nuts, bolts, and screws to ensure safe working conditions. Replace worn or damaged parts for safety.
Manufacturer information
Bosch
Practical help
Common problems
Hedge trimmer does not operate
Check power supply, try another socket, inspect mains/extension cable for damage, or replace the fuse.
Hedge trimmer operates intermittently
Contact a Bosch Service Agent for internal wiring or switch defects.
Cutting blade gets hot
Have the blade sharpened or inspected for dents; apply lubricant spray.
Before use
- Inspect the hedge for wires and other foreign objects.
- Check that all handles and guards are properly fitted.
- Ensure the blade is lubricated with maintenance spray.
- Verify that the mains voltage matches the rating plate.
- Check the RCD (if used) before each operation.
Specs in practice
- Rated power input
- Power consumption of the motor (480W or 500W depending on model).
- Cutting length
- The effective length of the blade (500mm to 700mm depending on model).
- Tooth opening
- Maximum branch diameter the blade can cut (26mm to 34mm depending on model).
Images and diagrams
- Figures A and B: Identification of main components (handle, switches, blade, guard).
- Figures C and D: Operation of the On/Off switch and lock-off button.
- Figure E: Proper technique for cutting hedges (bottom to top for sides).
- Figure F: Maintenance (lubrication and blade cover).
Model compatibility
- Use only approved extension cables compliant with EN 61242/IEC 61242 or IEC 60884-2-7.
- Extension cables must be earthed and watertight for outdoor use.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.