User Manual for BOSE SoundLink Revolve+ II Bluetooth Speaker

Quick guide from the manual

This document provides essential instructions for setting up and operating your BOSE SoundLink Revolve+ II Bluetooth speaker. Key tasks include initial charging, pairing with mobile devices via Bluetooth or NFC, and configuring advanced features like Party or Stereo modes. For optimal performance, ensure the speaker is placed on its base and kept away from metal objects or heat sources.

Speaker setup and power

Before first use, connect the speaker to an AC outlet using the provided USB cable and power supply to activate the battery. The battery light will blink amber while charging and glow green when fully charged. To power on, press the Power button. The speaker will automatically enter pairing mode if no devices are connected.

Bluetooth pairing

You can pair your mobile device using standard Bluetooth settings or NFC. To pair via Bluetooth, turn on the feature on your device and select the speaker from the list. For NFC, tap and hold your device against the top center of the speaker (Bose logo). The speaker can store up to eight paired devices and connect to two simultaneously.

Wired connections

The speaker supports wired audio via the AUX connector (3.5 mm cable) or the micro-B USB port. After connecting the cable, press the Input mode button until the speaker announces the corresponding input mode.

Multi-speaker modes

You can pair two SoundLink speakers for enhanced audio. Use the Bose Connect app for the easiest setup. Manually, you can enable Party mode (both speakers play in unison) or Stereo mode (left/right channel separation) by using specific button combinations on the speaker control pad.

Care and maintenance

Clean the speaker surface with a soft, damp cloth. Avoid using chemicals, solvents, or abrasive cleaners. Do not allow liquids to enter any openings. For technical support or replacement parts, visit worldwide.Bose.com/Support/SLRPii.

Troubleshooting

If you encounter issues, first check the battery status and ensure all cables are secure. If the speaker does not pair, clear the pairing list by holding the Bluetooth button for 10 seconds. A factory reset can be performed by holding the Power button for 10 seconds while the speaker is on.