Electronics / Speakers Soundbars
Bose 018SBARWBB Soundbar Wall Bracket Installation Guide
A comprehensive installation guide for the Bose 018SBARWBB Soundbar Wall Bracket, including mounting steps, compatibility, and safety instructions.
Table of contents
Quick guide from the manual
This document provides installation instructions for the Bose Soundbar Wall Bracket (model 018SBARWBB). It is designed exclusively for mounting specific Bose soundbars to wallboard surfaces. Ensure you have all necessary tools, including a drill, level, pencil, screwdriver, and tape, before beginning the installation.
Compatibility
This wall bracket is compatible only with the following Bose soundbar models: Bose Soundbar 700, Bose Soundbar 500, Bose TV Speaker, and SoundTouch 300 soundbar.
Safety and Installation Warnings
- Not for masonry: This product is not designed for masonry surfaces (brick, concrete, etc.).
- Surface requirements: Mount only on sturdy wallboard (minimum 3/8" or 10mm thickness).
- Concealed hazards: Do not mount on surfaces with electrical wiring or plumbing hidden behind them.
- Professional help: If you are unsure about the installation or the wall structure, contact a qualified professional installer.
- Ventilation: Do not place the soundbar in confined spaces like wall cavities or enclosed cabinets.
- Heat sources: Keep away from radiators, fireplaces, or other heat-producing equipment.
Installation Steps
- Positioning: Use the provided template (A) to mark the mounting locations on the wall relative to your TV. Use a level to ensure the template is straight.
- Mounting the bracket: Drill holes according to the template markings. Use the appropriate hardware (B, C, D, E, F) based on whether you are mounting to wallboard or a wooden stud.
- Preparing the soundbar: Rotate the feet on the bottom of the soundbar as indicated in the manual.
- Connections: Connect the power, optical, and HDMI cables to the soundbar before final mounting.
- Final mounting: Secure the soundbar onto the installed brackets (K) using the provided screws (G).
- Finishing: Attach the cable cover (J) to hide the wiring.
Support
For further assistance, visit the official support pages: worldwide.Bose.com/Support/SB700, worldwide.Bose.com/Support/SB500, global.Bose.com/Support/ST300, or worldwide.Bose.com/Support/TVS.
Official resources from the manual
Manufacturer information
Bose Corporation
Practical help
Common problems
Unsure if the wall is suitable for mounting.
The bracket is only designed for wallboard (min 3/8"/10mm). Do not mount on masonry. If unsure, consult a professional installer.
Soundbar overheating.
Ensure the soundbar is not placed in a confined space like a wall cavity or enclosed cabinet.
Before use
- Verify your soundbar model is compatible (700, 500, TV Speaker, or SoundTouch 300).
- Check the wall surface is sturdy wallboard (min 3/8"/10mm).
- Ensure no electrical wiring or plumbing is behind the mounting area.
- Gather required tools: drill, level, pencil, screwdriver, and tape.
- Confirm all hardware (A-L) is present.
Specs in practice
- Wallboard thickness
- Must be at least 3/8" (10mm) to support the weight of the soundbar.
- Drill bit sizes
- Use 3/32" (2.4mm) for wood studs and 3/16" (5mm) or 11/32" (8.7mm) for wallboard anchors depending on the hardware.
Model compatibility
- Compatible with Bose Soundbar 700, 500, TV Speaker, and SoundTouch 300 only.
- Not designed for masonry surfaces.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.