MULTIPOWER 100W
High-performance 100W wall charger featuring GaN technology, 3 ports (USB-C and USB-A), and automatic voltage adaptation for global use.
Table of contents
Product Overview
The Cellularline MULTIPOWER 100W (ACHUSBGAN3PD100WK) is a high-performance wall charger that utilizes advanced GaN (Gallium Nitride) technology. This innovative material allows for a more efficient charging process compared to traditional components, enabling the construction of a compact charger that delivers high power output while maintaining lower operating temperatures. The device is equipped with intelligent switching technology, which automatically adapts to the voltage standards of the country where it is being used, making it an ideal travel companion.
Charging Capabilities
The charger features three ports, including USB-C and USB-A, allowing you to recharge a wide variety of devices simultaneously. Whether you are charging a smartphone, tablet, or laptop, the charger provides the necessary power through compatible USB-C or USB-A cables. The battery charge level of your connected device can be monitored directly on the device's own display.
Safety and Usage
To ensure safe operation, please follow these guidelines:
- Use the charger only as instructed in the packaging.
- Do not connect the device to damaged or unsafe power outlets.
- Protect the product from dirt, humidity, and overheating.
- Use the charger only in dry environments and avoid any contact with liquids.
- Do not expose the device to direct sunlight, high temperatures, or open flames.
- If the charger is dropped, inspect it for damage before using it again.
- Keep the device out of the reach of children.
- To disconnect the charger from the mains power supply, pull it directly out of the socket.
Technical Specifications
The charger supports a wide input range of AC 100-240V, 50/60Hz, 1.5A Max. It offers versatile output configurations:
- USB-C1/USB-C2: Up to 100W (PPS support: 3.3V-21.0V/5.0A).
- USB-A: Up to 30W.
- Combined output options allow for simultaneous charging, such as 65W + 30W or 60W + 20W + 18W.
- The device weighs 202.30g and has dimensions of 40.40mm x 43.00mm x 106.30mm.
- Average active efficiency is 79.7%, with low-load efficiency (10%) at 70.4% and idle power consumption of 0.21W.
Disposal and Compliance
This product must not be disposed of with household waste at the end of its life. Please separate it from other waste types and recycle it responsibly to promote sustainable resource reuse. The product carries the CE mark, confirming compliance with EU directives regarding electromagnetic compatibility, low voltage, and RoHS standards.
Manufacturer information
Cellularline S.p.A.
Practical help
Common problems
Ensure the charger is firmly plugged into a functional power outlet and the cable is securely connected to both the charger and the device.
It is normal for GaN chargers to generate some heat during high-power output. Ensure it is used in a well-ventilated, dry area.
Before use
- Check that the power outlet is not damaged.
- Ensure the environment is dry and free of liquids.
- Verify that the charging cable is intact.
- Confirm the device is compatible with USB-C or USB-A charging.
Specs in practice
- GaN Technology
- Gallium Nitride material for higher efficiency and smaller size.
Model compatibility
- Compatible with any device powered via USB-C or USB-A cable.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.