Crystorama 130-MK_CEILING Three Light Ceiling Mount Instruction Manual

Quick guide from the manual

This document provides assembly and installation instructions for the Crystorama 130-MK_CEILING light fixture. The fixture is damp-rated and requires installation by a licensed electrician in accordance with the National Electric Code and local electrical codes. Ensure power is turned off before starting any work.

Safety and Requirements

• Electrical Safety: Turn off power at the source before installation.
• Bulb Requirements: Uses 3 Candelabra Base bulbs (not included). Recommended 40W, Maximum 60W. LED bulbs are recommended for extended use.
• Warning: This product contains lead, which is known to the state of California to cause cancer and/or birth defects or reproductive harm.

Installation for Hanging

1. Determine the desired hanging height and adjust the chain length accordingly.
2. Open one link of the chain, connect it to the fixture loop, and close the link. Repeat for the canopy loop.
3. Thread mounting screws into the mounting bar and secure with the small hex nut.
4. Attach the mounting bar to the outlet box using the provided screws.
5. Raise the canopy, allowing the mounting screws to protrude through the holes, and secure with the ball nut.

Installation for Ceiling Mount

1. Loosen the hex nut on the canopy and disassemble it.
2. Remove the loop from the top of the fixture.
3. Slide the canopy, metal washer, and lock washer over the nipple, then secure with the hex nut.
4. Thread mounting screws into the mounting bar and secure with the small hex nut.
5. Attach the mounting bar to the outlet box using the provided screws.
6. Raise the canopy, allowing the mounting screws to protrude through the holes, and secure with the ball nut.

Crystal Arrangement

The fixture includes three types of crystals (A, B, and C). Hang crystals A and B on the metal ring and bottom basket, alternating between them. Finally, hang the glass drop C at the bottom of the bottom basket.