findmanualpdf.com

DJI Mavic 3 Battery Charging Hub (100W) & Car Charger

Official user guide for the DJI Mavic 3 Battery Charging Hub (100W) and 65W Car Charger, covering setup, safety, charging sequences, and technical specifications.

Table of contents

Product Overview

The DJI Mavic 3 Battery Charging Hub (100W) is designed specifically for use with Mavic 3 Intelligent Flight Batteries. When connected to a compatible power adapter, the hub can charge up to three batteries in sequence, starting from the one with the highest power level down to the lowest. This ensures you have a fully charged battery ready as quickly as possible.

Safety and Usage

Before using the charging hub, ensure it is placed on a flat, stable surface. The device must be properly insulated to prevent fire hazards. Never touch the metal terminals on the hub. If you notice any buildup on the terminals, clean them with a clean, dry cloth. The hub is only compatible with BWX260-5000-15.4 Intelligent Flight Batteries; do not attempt to use it with other battery models.

To charge, insert the batteries into the ports and connect the hub to a power outlet using a compatible charger. The status LED indicator will provide feedback on the charging process. A pulsing green light indicates charging, while a solid green light means all batteries are fully charged. If the LED shows solid yellow, no battery is inserted. Blinking yellow indicates the battery temperature is too high or too low, and solid red indicates a power supply or battery error.

Car Charger

The DJI 65W Car Charger allows you to charge your Mavic 3 Intelligent Flight Battery, remote controller, or mobile devices using a vehicle's power outlet. It is critical to only use the car charger while the vehicle's engine is running to avoid draining the car battery. If the connection becomes loose during charging, you may need to remove and reinsert the battery to resume the process.

Maintenance and Disposal

Always handle the charging equipment with care. Do not attempt to modify the devices. When the equipment reaches the end of its service life, it must be disposed of according to local environmental regulations. Electronic waste should not be thrown in regular household trash but taken to designated collection points for recycling, which helps in the recovery of valuable raw materials and the safe treatment of toxic substances.

Manufacturer information

DJI

Brand profile

Practical help

Common problems

Status LED blinks yellow

Battery temperature is too high or too low; no further operation is needed.

Status LED is solid red

Power supply or battery error; remove and reinsert the batteries or unplug and plug in the power adapter.

Car charger connection becomes loose

Remove and reinsert the Intelligent Flight Battery to resume charging.

Before use

  • Ensure the charging hub is placed on a flat and stable surface.
  • Verify the battery model is compatible (BWX260-5000-15.4).
  • Check that the power adapter is compatible (100W or 65W).
  • Ensure the car engine is running before using the car charger.
  • Inspect metal terminals for any buildup and clean with a dry cloth if necessary.

Specs in practice

Operating Temperature
The ambient temperature range (5° to 40° C) in which the device can safely operate.
Charging Time
Estimated time to charge a single battery based on the power adapter used.

Model compatibility

  • Charging hub is only compatible with BWX260-5000-15.4 Intelligent Flight Batteries.
  • Car charger is designed for Mavic 3 Intelligent Flight Battery, remote controller, or mobile devices.

Manual page author

Emily Carter

User documentation editor

Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.