Einhell TP-CI 18/250-C Li BL Cordless Impact Driver

Product Description

The Einhell TP-CI 18/250-C Li BL is a high-performance cordless impact driver designed for demanding screwdriving tasks. It features a brushless motor for increased efficiency and longer runtime. The tool offers three speed and torque settings, allowing for precise control based on the screw size.

Technical Data

• Motor Power Supply: 18 V DC
• Idling Speed: 0 - 2800 min-1
• Blow Rate: 0 - 3800 min-1
• Bit Mount: 1/4" (6.35 mm)
• Weight: 0.95 kg

Safety Instructions

Always wear appropriate personal protective equipment, including safety goggles, ear protection, and a dust mask when working with materials that generate dust. Ensure the battery is stored in a dry place between +10°C and +40°C and is at least 40% charged before storage.

Operation

To operate the tool, insert a charged battery pack. Use the direction changeover switch to select the rotation direction and lock the tool. The On/Off switch provides infinitely variable speed control. The 3-speed selector switch allows you to adjust the torque and speed to the specific screw size. The integrated LED lamp automatically illuminates the work area when the trigger is pressed.

Maintenance and Troubleshooting

Keep air vents and the motor housing clean. Always remove the battery before performing any maintenance or tool changes. If the battery fails to charge, check the power supply and charging contacts. If the battery temperature is too low or high, remove it and allow it to reach room temperature before attempting to charge again.

Disposal

Dispose of the tool, battery, and packaging in an environmentally friendly manner at designated collection points. Do not dispose of power tools in household waste.