Lighting / Decorative Lighting
GE Appliances 24002LO LED Dual Color Lighted Candlewood Pine Wreath User Guide
Quick guide for the GE Appliances 24002LO LED wreath. Learn how to install batteries, operate the built-in timer, select lighting modes, and follow essential safety precautions.
Quick answers from the manual
Quick answer
- The 24002LO LED wreath is powered by 3 AA alkaline batteries and features a built-in timer (5 hours on, 19 hours off) and 4 selectable lighting modes. p. 1
Key actions
- Remove the 'Try Me' board connector before installing batteries. p. 1
- Select lighting mode using the function list. p. 1
First start
- Remove the 'Try Me' connector, install 3 AA alkaline batteries, and select a mode. p. 1
Show 4 more answers Show less
Problems and fixes
Battery ingestion hazard
Seek immediate medical attention if a battery is suspected to be swallowed.
p. 1Maintenance and reset
- Remove batteries if the product will not be used for an extended period. p. 1
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Power | 3x AA Alkaline batteries | Required power source | p. 1 |
| Timer | 5 hours on / 19 hours off | Automatic lighting cycle | p. 1 |
Where to find it in the PDF
- Safety and Operation p. 1
Table of contents
Quick guide from the manual
This product is an indoor-use LED decorative wreath. It operates on 3 AA alkaline batteries and features a built-in timer that cycles automatically (5 hours on, 19 hours off). Before first use, ensure the "Try Me" board connector is removed from the battery compartment.
Safety Instructions
- Indoor Use Only: Do not use seasonal products outdoors unless marked suitable.
- Fire Safety: Do not mount near gas or electric heaters, fireplaces, candles, or other heat sources.
- Wiring: Do not secure wiring with staples or nails. Do not hang ornaments from the cord or light string.
- Battery Safety: This product contains a button cell or coin battery. Keep new and used batteries out of reach of children. If swallowed, seek immediate medical attention.
Battery Installation
The product requires 3 AA alkaline batteries. Ensure the batteries are installed with the correct polarity (+ and -). Do not mix old and new batteries or different types of batteries. Remove batteries if the product will not be used for an extended period.
Timer and Operation
The built-in timer automatically controls the lighting cycle. Once the lights are turned on, they will remain lit for 5 hours and then automatically shut off for 19 hours. The lights will turn on again the next evening at the same time. This cycle repeats until the unit is switched to the OFF position.
Lighting Modes
The product features 4 distinct lighting functions:
- 1. White & Multi Color Change
- 2. Steady White
- 3. Steady Multi
- 4. Off
Practical help
Common problems
Lights do not turn on
Ensure the 'Try Me' board connector has been removed. Check that 3 fresh AA alkaline batteries are installed with correct polarity.
Battery ingestion hazard
This product contains a button cell or coin battery. Keep out of reach of children. Seek immediate medical attention if a battery is suspected to be swallowed.
Before use
- Remove the 'Try Me' board connector from the battery compartment
- Install 3 AA alkaline batteries
- Verify battery polarity (+/-)
- Inspect product for damaged wires or insulation
- Ensure the product is used indoors only
Show more Show less
Specs in practice
- Power Source
- 3x AA Alkaline batteries
- Lighting Modes
- 4 modes: White & Multi Color Change, Steady White, Steady Multi, Off
Images and diagrams
- Battery compartment diagram shows the correct orientation for 3 AA batteries
- Function list diagram details the 4 available lighting modes
Model compatibility
- Indoor use only
- Not intended for permanent installation
Manual page author
Michael Turner
Technical manual editor