User Manual for GE Appliances LED 600 14.5mm Lights

Quick guide from the manual

This product is for indoor use only. It is a seasonal product not intended for permanent installation. Always unplug the device when leaving the house, retiring for the night, or if left unattended.

Safety Instructions

• Do not mount near gas or electric heaters, fireplaces, or candles.
• Do not secure wiring with staples or nails.
• Do not hang ornaments from the cord or wire.
• Keep away from small children; this is an electric product, not a toy.
• Do not cover the product with cloth or paper during use.

Use and Care

If placing on a live tree, ensure the tree is fresh and well-maintained. Keep the tree holder filled with water and ensure the tree is stable. Before use, inspect the product for damaged insulation, cracks in lampholders, or loose connections. Store in a cool, dry location away from sunlight.

User Servicing Instructions

To replace a lamp:

1. Unplug the device from the outlet.
2. Pull the lamp and plastic base straight out of the lampholder.
3. Replace with a 3.3 Volt, 0.066 Watt LED type lamp.

If the new base does not fit:

1. Remove the base of the burned-out lamp by straightening the leads and pulling the lamp out.
2. Thread the leads of the new lamp through the holes in the old base.
3. Bend each lead up so they touch the contacts inside the lampholder.

Troubleshooting

If the product does not light, ensure all LEDs are firmly pushed into their sockets (do not twist). Check that male/female connectors are fully inserted and the foot pedal is in the 'on' position. If an LED is missing, replace it with a spare. For issues with color switching, contact customer support.

Contact Information

For questions or assistance, call customer service at 1-877-398-7337 or visit www.geholidaylighting.com.