User Manual for GE Holiday 00179 LED Icicle Set

Quick guide for the GE Holiday 00179 LED Icicle Set. Includes safety instructions, installation steps, end-to-end connection guide, and bulb replacement procedures.

Quick answers from the manual

Quick answer

The GE Holiday 00179 is a decorative LED icicle set for indoor/outdoor use. It supports connecting up to two sets end-to-end and requires the specific TS-5W29V power supply. p. 1

Key actions

Connect sets end-to-end p. 1
Replace bulbs p. 1

Problems and fixes

Burned out lamp

Replace promptly with provided 3.3V, 20mA LED lamps.

p. 1

Technical specifications

Parameter	Value	Meaning	Pages
Power Supply	TS-5W29V	GE branded, Class 2 Power Supply	p. 1
Electrical Rating	120V 60 Hz	Standard power requirement	p. 1

Where to find it in the PDF

Safety and Installation Instructions p. 1

Table of contents

Important Information

This guide provides instructions for the GE Holiday 00179 LED Icicle Set. This product is designed for both indoor and outdoor use. Always follow basic electrical safety precautions when using this product.

Safety Instructions

Do not install on trees with metal needles, leaves, or branch coverings.
Do not mount or support strings in a way that can cut or damage wire insulation.
Unplug the product when leaving the house, retiring for the night, or if left unattended.
Do not use this product for other than its intended use.
Do not hang ornaments or other objects from the cord, wire, or light string.
Do not place the lighting string on carpeting, drapes, furniture, or allow it to contact vinyl siding while the power is on.
Do not close doors or windows on the product or extension cord.
Do not cover the product with cloth, paper, or any material not part of the product when in use.
If using outdoors, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet.

Installation and Use

When placing the product on a live tree, ensure the tree is well-maintained, fresh, and stable. Do not use on trees where needles are brown or break off easily. Before using or reusing, inspect the product carefully for cut, damaged, or frayed wire insulation, cracks in lampholders, or loose connections. Discard any damaged products.

Connecting Sets End to End

The lighting string is rated 14.4 Watts (0.12 Amps). To connect sets end-to-end:

Choose one set as your master set; this is the only set connected to a plug.
Unscrew the coaxial connector between the light sets you wish to connect.
Connect each set end-to-end using the coaxial connections, screwing each connection cap tightly.
You may only add one (1) additional set to your master set for a total of two (2) connected sets.

User Servicing (Replacing Lamps)

The bulb locking feature keeps bulbs securely in place. To replace a bulb:

Bulb replacement diagram showing base and socket

Grasp the plug and remove it from the receptacle. Do not unplug by pulling on the cord.
Remove the lock from the slot.
Pull the lamp and plastic base straight out of the lampholder.
Replace with a 3.3V, 20mA LED lamp provided with the product.
Put the lock back into the slot to ensure a secure fit.

Do not perform maintenance or troubleshoot while the power is on.

Technical Specifications

Use only the GE branded, Class 2 Power Supply, Model TS-5W29V, manufactured by Guang Zhou Ting Shen Electric Co Ltd. provided with this product. Do not use this adapter with any other product.

Practical help

Common problems

Bulb burnout

Replace burned-out lamps promptly using only the 3.3V, 20mA LED lamps provided with the product.

Connector mismatch

If the connector does not fit, do not modify the product. Discard the product if the connector is damaged.

Before use

Inspect product for cut, damaged, or frayed wire insulation.
Check for cracks in lampholders or enclosures.
Ensure tree is stable and well-maintained if using on a tree.
Verify the use of a GFCI outlet if installing outdoors.
Ensure the power unit is oriented in a vertical or floor mount position.

Specs in practice

Power Supply: Use only the provided GE Model TS-5W29V Class 2 power supply.
Electrical Rating: 120V, 60Hz. Total rating 14.4 Watts (0.12 Amps).

Images and diagrams

Fig. 1 and Fig. 2 illustrate the bulb replacement process, showing the base and socket alignment.

Model compatibility

Maximum of two (2) sets can be connected end-to-end.
Not intended for permanent installation.

Show more Show less

Manual page author

Emily Carter

User documentation editor

Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.