User Manual for GE Lighting 00103 LED Icicle Light Set

Quick guide for the GE Lighting 00103 LED Icicle Light Set. Includes safety instructions, fuse replacement steps, LED maintenance, and electrical connection limits.

Quick answers from the manual

Quick answer

The GE Lighting 00103 is a 100-count LED icicle light set. It is rated for 120V, 60Hz, and consumes 8 Watts. You can connect multiple strings up to a maximum of 216 Watts total. p. 1

Key actions

Replace a blown fuse p. 1
Replace a burned-out LED p. 1

Problems and fixes

Fuse blows

Unplug the set and any additional strings. Replace the fuse with the provided 3A fuse. If it blows again, a short circuit may be present.

p. 1

Technical specifications

Parameter	Value	Meaning	Pages
Voltage	120 V	Operating voltage	p. 1
Max Load	216 Watts	Maximum total wattage for connected strings	p. 1

Where to find it in the PDF

Safety and Servicing Instructions p. 1

Table of contents

Manual images

Click an image to enlarge

Fuse replacement procedure showing the fuse panel on the plug.

Page 1

Page 1

Quick Guide from the Manual

This document provides essential safety and maintenance instructions for the GE Lighting 00103 LED Icicle Light Set. Key operational limits include a maximum total connection of 216 Watts (1.8 Amps). Always ensure the light set is unplugged before performing any maintenance, such as replacing fuses or LEDs.

Safety Instructions

Fire and Electric Shock Prevention: Do not install on trees with metal needles, leaves, or branch coverings. Do not mount strings in a way that cuts or damages wire insulation.
Usage Restrictions: This is an electrical product, not a toy. Keep away from small children. Do not use near gas or electric heaters, fireplaces, candles, or other heat sources.
Outdoor Use: Use only if marked for indoor and outdoor use. When used outdoors, connect to a Ground Fault Circuit Interrupting (GFCI) outlet.
General Safety: Unplug the product when leaving the house, retiring for the night, or if left unattended. Do not secure wiring with staples or nails.

Use and Care Instructions

Tree Usage: If used on a live tree, ensure the tree is well-maintained, fresh, and stable. Keep the tree holder filled with water.
Inspection: Before use or reuse, inspect the product carefully. Discard any product with cut, damaged, or frayed wire insulation, cracks in lampholders, or loose connections.
Storage: When not in use, store neatly in a cool, dry location protected from sunlight. Avoid undue strain on conductors and wires.

User Servicing Instructions

Replacing LEDs

If a number of LEDs are burned out, it puts extra stress on the remaining LEDs. Replace burned-out LEDs promptly with the spare lamps provided (3.3 volt, 0.066 Watt).

Grasp the plug and remove from the receptacle.
Pull the lamp and plastic base straight out of the lampholder.
Do not twist the lamps; push straight in or pull out to avoid damage.

Fuse Replacement

A blown fuse indicates an overload or short-circuit. If the fuse blows, unplug the product and any additional strings attached.

Ensure the light set is unplugged.
Locate the fuse panel on the plug.
Slide the panel open to expose the fuses.
Remove the blown (darkened) fuse carefully.
Replace with the spare fuse included in the set (125 volt, 3 amp).
Close the panel completely by sliding the cover back on.

Technical Specifications

Voltage: 120 V, 60 Hz
Power Rating: 8 Watts (0.067 Amps)
Maximum Connection: 216 Watts (1.8 Amps) total
Fuse Rating: 125 Volt, 3 Amp
LED Rating: 3.3 Volt, 0.066 Watt

Practical help

Common problems

Fuse blown

Unplug the set, slide open the fuse panel on the plug, and replace the blown fuse with the spare 3A fuse provided.

LEDs burned out

Replace promptly with the provided 3.3V, 0.066W spare lamps. Do not twist; pull straight out.

Overload

Do not exceed 216 Watts total when connecting multiple strings end-to-end.

Before use

Inspect for cut, damaged, or frayed wire insulation.
Check for cracks in lampholders or enclosures.
Ensure no loose connections or exposed copper wire.
If using on a live tree, ensure it is fresh and stable.
Verify the outlet is GFCI protected if using outdoors.

Images and diagrams

The fuse panel is located on the attachment plug.
LED replacement involves pulling the lamp and base straight out of the socket.

Model compatibility

For indoor and outdoor use.
Do not connect to strings without a wattage rating without calculating total load first.

Show more Show less

Manual page author

Michael Turner

Technical manual editor

Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.