Instruction Manual for Home Accents Holiday C9 LED Steady Lit Heavy Duty Lights

Quick guide for Home Accents Holiday C9 LED Steady Lit Heavy Duty Lights. Includes safety instructions, fuse and LED replacement steps, troubleshooting, and technical specifications.

Quick answers from the manual

Quick answer

This manual provides safety, maintenance, and troubleshooting instructions for Home Accents Holiday C9 LED lights, including fuse and LED replacement procedures. p. 1

Key actions

Replace fuse p. 1
Replace LED p. 1

Problems and fixes

Lights not working

Check the glass fuse inside the plug. Replace with spare if filament is broken.

p. 1

Technical specifications

Parameter	Value	Meaning	Pages
Power Rating	15.6 Watts	Power consumption of one string	p. 1
Max Load	216 Watts	Maximum total wattage for connected strings	p. 1

Where to find it in the PDF

Safety and Maintenance p. 1

Table of contents

Important Information

This manual provides essential safety, maintenance, and troubleshooting instructions for the Home Accents Holiday C9 LED Steady Lit Heavy Duty Lights. This product is intended for seasonal use (maximum 90 days) and is suitable for both indoor and outdoor use.

Safety Instructions

Electrical Safety: This is an electric product, not a toy. Keep out of reach of small children.
Installation: Do not mount near gas or electric heaters, fireplaces, or candles. Do not secure wiring with staples or nails.
Outdoor Use: When used outdoors, connect to a Ground Fault Circuit Interrupting (GFCI) outlet.
Operation: Do not close doors or windows on the product or extension cords. Do not cover the product with cloth or paper.
Maintenance: Do not perform maintenance or troubleshoot while the power is on. Unplug when leaving the house or retiring for the night.

Use and Care

Tree Maintenance: If used on a live tree, ensure the tree is well-maintained, fresh, and stable. Keep the tree holder filled with water.
Storage: When not in use, store neatly in a cool, dry location protected from sunlight.
Inspection: Before use, inspect for cut, damaged, or frayed wire insulation, cracks in LED holders, or loose connections.

User Servicing

Fuse Replacement

If the lights are not working, the fuse may have blown due to an overload. To replace:

Unplug the set from the outlet. Do not pull by the cord.
Using a flathead screwdriver, slide open the fuse access cover on top of the attachment plug.
Remove the fuse carefully.
Replace with a 3 Amp, 125 Volt fuse (provided with the product).
Close the fuse cover completely.

LED Replacement

Ensure the set is unplugged.
Unscrew the plastic reflector from the LED holder.
Remove the old LED.
Replace with a new 3.2 Volt, 0.064 Watt LED (provided with the product).
Place the plastic reflector back over the LED.

Troubleshooting

If the lights are not working, check the glass fuse located inside the plug. If the metal filament inside the glass fuse is broken, replace it with the spare fuse provided in the accessory bag. If the product continues to malfunction, contact customer service at 1-855-HDHoliday (1-855-434-6543).

Technical Specifications

Rating: 15.6 Watts (0.13 Amps) per string.
Maximum Capacity: Do not exceed 216 Watts (1.80 Amps) total when connecting strings end-to-end.
LED Specs: 3.2 Volt, 0.064 Watt.

Manufacturer information

Home Accents Holiday

Brand profile

Manufacturer website https://www.homedepot.com Support https://www.homedepot.com

Practical help

Common problems

Lights are not working

Check the glass fuse inside the plug. If the metal filament is broken, replace it with the spare fuse provided.

Before use

Inspect product for cut, damaged, or frayed wire insulation.
Check for cracks in LED holders or enclosures.
Ensure no loose connections or exposed copper wire.
If using outdoors, connect to a GFCI outlet.
Ensure the tree (if used) is well-maintained and stable.

Specs in practice

Maximum Capacity: 216 Watts (1.80 Amps) total when connecting strings end-to-end.
LED Specification: 3.2 Volt, 0.064 Watt LED.

Images and diagrams

Fuse access: Slide open the fuse cover on top of the plug using a flathead screwdriver.
LED replacement: Unscrew the plastic reflector, remove the old LED, insert the new 3.2V 0.064W LED, and replace the reflector.

Model compatibility

For seasonal use only (90 days max).
Do not connect to other lighting strings without checking wattage ratings.
Do not use with dimmer switches.

Show more Show less

Manual page author

Michael Turner

Technical manual editor

Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.