GLOBO LIGHTING 15945-3D Ceiling Light

Product Overview

The GLOBO LIGHTING 15945-3D is a decorative ceiling light fixture designed for indoor use. It features a three-light configuration, providing ambient illumination suitable for various living spaces. The fixture is engineered for standard residential electrical systems.

Technical Specifications

• Model: 15945-3D
• Light Source: 3x E14 base bulbs
• Maximum Wattage: 40W per socket
• Voltage: 230V~ 50Hz

Safety Instructions

Before beginning any installation or maintenance work, it is critical to ensure the electrical power is completely disconnected. Locate your main circuit breaker or fuse box and switch off the power supply to the area where the light will be installed. Failure to do so may result in electric shock or injury. Always verify that the power is off before touching any wiring.

Installation

The installation process involves mounting the base plate to the ceiling and connecting the electrical wires. Ensure the mounting surface is stable and capable of supporting the weight of the fixture. Connect the live (L), neutral (N), and earth (ground) wires to the corresponding terminals on the connection block provided. Ensure all connections are secure and that no loose wires are exposed. Once the base is securely attached, proceed to install the glass shades and the light bulbs.

Operation and Maintenance

To operate the light, simply switch the power back on at the circuit breaker. When replacing bulbs, always ensure the fixture is switched off and the bulbs have cooled down completely to prevent burns. Use only bulbs that do not exceed the maximum wattage rating of 40W per socket. Clean the fixture periodically with a soft, dry cloth. Avoid using abrasive cleaners or chemicals that could damage the finish of the light.

Troubleshooting and Disposal

If the light fails to turn on, first check the circuit breaker to ensure power is restored. Verify that the bulbs are screwed in correctly and are not burnt out. If the issue persists, consult a qualified electrician. When the product reaches the end of its service life, dispose of it in accordance with local environmental regulations regarding electronic waste and lighting fixtures.