Lighting / Fixtures
Instruction Manual for Globo Lighting 12379-6W Ceiling Lamp
Quick guide for installing and operating the Globo Lighting 12379-6W ceiling lamp. Includes mounting steps, wiring instructions, and color temperature adjustment settings.
Table of contents
Quick guide from the manual
This document provides essential installation and operation instructions for the Globo Lighting 12379-6W series ceiling lamp. Before starting, ensure the power supply is disconnected at the circuit breaker. The lamp features three adjustable color temperature modes (3000K, 4000K, 6500K) controlled via the standard wall switch.
Installation
- Turn off the main power supply at the circuit breaker.
- Mark and drill holes in the ceiling according to the mounting bracket dimensions.
- Secure the mounting bracket to the ceiling using the provided screws and anchors.
- Pass the power supply cable through the designated opening in the bracket.
- Connect the power wires to the terminal block on the lamp housing.
- Attach the lamp housing to the mounted bracket.
- Restore power at the circuit breaker.
Operation and Settings
The lamp offers three light color temperatures. You can switch between these modes by toggling your wall switch:
- Step 1: 3000K (Warm White)
- Step 2: 4000K (Neutral White)
- Step 3: 6500K (Cool White)
To change the color, turn the light off and on again quickly to cycle to the next step.
Safety and Maintenance
The light source in this product is integrated into the construction and is not interchangeable. It belongs to energy efficiency class F. Do not attempt to replace the LED module, as this will damage the fixture.
Manufacturer information
Globo Lighting
Practical help
Common problems
Light does not turn on
Check if the circuit breaker is in the ON position and ensure all wire connections in the terminal block are secure.
Cannot change color temperature
Ensure you are toggling the wall switch quickly. If the light is left off for too long, it may reset to the default starting mode.
Before use
- Ensure the power is turned off at the main circuit breaker.
- Verify that the ceiling surface can support the weight of the lamp.
- Check that all necessary mounting hardware is included.
- Confirm the wall switch is functioning correctly.
Specs in practice
- 3000K / 4000K / 6500K
- Adjustable color temperatures ranging from warm yellow (3000K) to cool daylight (6500K).
- Energy Efficiency Class F
- Indicates the energy performance rating of the integrated LED light source.
Images and diagrams
- Step A: Shows the circuit breaker being turned to the OFF position.
- Step 1-4: Illustrates the mounting bracket installation process.
- Step 5: Details the wiring connection into the terminal block.
- Step 6-7: Shows the final attachment of the lamp to the bracket.
Model compatibility
- The light source is non-replaceable and permanently fixed to the product structure.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.