Globo 15548S1 Pendant Lamp Assembly and Operation Guide

Product Overview

The Globo 15548S1 is a stylish floor lamp designed for indoor use. It features a tripod-style base and a glass shade, providing a modern aesthetic suitable for various living spaces. The lamp is designed for easy assembly and reliable operation.

Technical Specifications

• Model: 15548S1
• Voltage: 230V ~ 50Hz
• Socket Type: E27
• Maximum Wattage: 1x 60W
• Light Source: Not included (excl.)

Assembly Instructions

Follow these steps to assemble your lamp safely:

• Base Assembly: Connect the three legs of the tripod base by screwing the segments together as indicated in the assembly diagram. Ensure all connections are tight and stable.
• Shade Installation: Place the glass shade onto the top fixture of the tripod base. Secure it according to the provided diagram to ensure it sits level and stable.
• Bulb Installation: Insert an E27 bulb (max 60W) into the socket. Ensure the power is disconnected before installing or replacing the bulb.

Safety and Operation

For your safety, please adhere to the following guidelines:

• Ensure the lamp is placed on a flat, stable surface to prevent tipping.
• Do not exceed the maximum wattage specified for the bulb socket.
• Always unplug the lamp from the power outlet before cleaning or changing the light bulb.
• Keep the lamp away from water and moisture to prevent electrical hazards.
• The lamp is operated via a foot switch located on the power cord.

Maintenance and Care

To keep your lamp in good condition, wipe the exterior surfaces with a soft, dry cloth. Do not use abrasive cleaners or chemicals, as these may damage the finish. Periodically check that all screws and connections remain tight to ensure the structural integrity of the tripod base.

Troubleshooting

If the lamp fails to turn on, first check that the bulb is properly screwed into the socket and is not burnt out. Verify that the power cord is securely plugged into a functional wall outlet. If the issue persists, inspect the power cord for any visible damage. Do not attempt to repair the internal wiring yourself; contact a qualified electrician if necessary.

Disposal

When the product reaches the end of its service life, please dispose of it according to local environmental regulations. Do not discard electrical components in regular household waste. Utilize designated recycling centers for electronic equipment to ensure proper handling and material recovery.