findmanualpdf.com

HIKOKI C 1806DA Cordless Circular Saw

The HiKOKI C 1806DA is a high-performance cordless circular saw designed for cutting various types of wood. It features an 18V motor, a no-load speed of 3800 min-1, and a cutting depth of 57 mm at 90° and 38 mm at 45°.

Table of contents

Product Description

The HiKOKI C 1806DA is a professional-grade cordless circular saw engineered for precision and efficiency in woodworking applications. It is powered by an 18V battery system, providing a no-load speed of 3800 min-1 for clean and accurate cuts.

Technical Specifications

  • Model: C 1806DA
  • Voltage: 18 V
  • No-Load Speed: 3800 min-1
  • Cutting Depth (90°): 57 mm
  • Cutting Depth (45°): 38 mm
  • Weight: 3.5 kg (BSL1850C) / 4.0 kg (BSL36B18)

Safety Information

General Power Tool Safety: Always keep the work area clean and well-lit. Use personal protective equipment, including eye and hearing protection. Ensure the switch is in the OFF position before connecting the battery.

Circular Saw Safety: Keep hands away from the cutting area and the blade. Never reach underneath the workpiece. Always support large panels to minimize the risk of blade pinching and kickback. Maintain a firm grip with both hands and position your body to either side of the blade, not in line with it.

Operation

Before use, ensure the battery is fully charged. The tool features overload and overheat protection to prevent motor damage. If the tool stops during operation, release the switch and eliminate the cause of the overload or allow the battery to cool.

Maintenance

Regularly inspect the saw blade for wear and replace it if necessary. Keep the motor ventilation slots clean and free of dust. Periodically check the lower guard for smooth operation and clean the inside of the saw cover to prevent sawdust accumulation. Always remove the battery before performing any maintenance or adjustments.

Lower guard maintenance
Lower guard maintenance

Troubleshooting

If the tool does not operate normally, check the battery charge and installation. If the tool stops suddenly, it may be due to overload or overheating; allow it to cool. If cutting performance is poor, check if the blade is dull or installed backwards.

Disposal

Do not dispose of electric tools together with household waste. Follow local regulations for the recycling of electric tools and batteries.

Main components of the C 1806DA
Main components of the C 1806DA

Related manuals

Related manuals from the same brand or category.

Manual page author

Emily Carter

User documentation editor

Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.