Husky Extra Deep 42 in. 10-Drawer Mobile Work Bench

Product Overview

The Husky Extra Deep 42 in. 10-Drawer Mobile Work Bench is a heavy-duty storage solution designed for home improvement and workshop organization. This unit features ten drawers for versatile storage, a built-in power strip for charging tools, and heavy-duty casters for mobility. It is constructed for durability and requires assembly before use.

Safety Information

Safety is paramount when using this mobile work bench. Always push the unit rather than pulling it to maintain control. Ensure the brakes are engaged on the casters when the unit is stationary to prevent rolling. Never tow the unit with power equipment or mount it to a vehicle. To prevent tipping, always load the unit starting from the bottom drawers and avoid opening multiple drawers simultaneously. Keep the unit on level surfaces at all times. Do not use the side handle as a leverage point for lifting the unit, as it is designed solely for moving the cabinet on its casters.

Assembly and Setup

Assembly should be performed by two people. Begin by attaching the cabinet handle and storage hooks using the provided bolts and hex key. When attaching the casters, lock the drawers and lay the cabinet on its top, using packaging material to protect the finish. Ensure all bolts are tightened securely but do not overtighten. The unit includes a power strip; ensure the power cord is routed through the provided rubber grommet at the rear of the unit to maintain weather resistance.

Operation and Maintenance

To remove a drawer, fully extend it, push up on one release lever while pulling down on the other, and slide the drawer out. To re-insert, align the brackets on the drawer with the slides and push until it clicks into place. For maintenance, grease the casters annually and lubricate the drawer slides semi-annually with high-quality bearing grease. Periodically clean surfaces with a mild detergent and water. Avoid using the unit near water or with wet hands to prevent electrical shock. Always unplug the power cord before performing any cleaning or maintenance.

Electrical Safety

The integrated power strip must be connected to a 125 Volt GFCI-protected outlet. Only use a three-wire extension cord rated for outdoor use if necessary. Never modify the plug or use adapter plugs. Ensure the cord is not damaged before use and keep it away from wet environments.