User Guide for JOOM 1-30M LED Strip Lights

Quick guide from the manual

This guide covers the setup, app connection, and troubleshooting for the JOOM 1-30M LED Strip Lights. The system uses a USB power source and can be controlled via a mobile app or a remote controller.

Getting started

To set up the light strip:

1. Connect the light strip to the control cable.
2. Plug the cable into a USB power port.
3. If using the remote, ensure a CR2025 button battery is installed correctly.

App connection and Bluetooth

To control the lights via smartphone:

1. Download the LotusLamp X app by scanning the QR code provided in the manual or searching in the App Store or Google Play Store.
2. Turn on the Bluetooth function on your phone.
3. Plug in the strip light.
4. Open the app; it should pair with the light strip automatically.

Linking multiple strips

The 20-meter and 30-meter versions are composed of smaller segments connected via a splitter:

• 20-meter strip: Composed of two 10-meter strips connected with a splitter.
• 30-meter strip: Composed of two 15-meter strips connected with a splitter.

Troubleshooting

If you encounter issues, follow these steps:

• Light strip does not glow: Try switching the positive and negative poles of the USB connection.
• Remote not working: Ensure the battery is installed correctly and align the controller with the power supply.
• App connection issues: Ensure Bluetooth is on. If it fails to connect, exit the app and reopen it, or restart your phone. Note that Bluetooth 4.0 supports one-to-many connections, not many-to-many.