Tools / Pressure Washers
User Manual for Michelin 12V Thermoelectric Cooler/Warmer P14M
Quick guide for the Michelin 12V Thermoelectric Cooler/Warmer P14M. Learn how to operate cooling and heating modes, use the USB port, maintain the unit, and follow safety precautions.
Table of contents
Quick Guide
The Michelin 12V Thermoelectric Cooler/Warmer is designed for 12V DC operation. It features both cooling and heating modes. For optimal performance, pre-cool your food and beverages before placing them in the unit. If using the heating mode, limit operation to 45 minutes for food safety. The unit also includes a USB port for charging devices.
Operating Instructions
The unit is controlled by a slider switch on the control panel:
- Right: Cooling mode (Green LED).
- Left: Heating mode (Red LED). Limit to 45 minutes max.
- Center: OFF (No light).
The unit includes a USB port that provides 5V DC power for charging devices. This port is active only when the cooler is powered by a 12V source, regardless of the slider switch position.
Maintenance
- Keep cords and cigarette lighter sockets clean to ensure good contact.
- Periodically clean the motor, fan, and control panel vents using a soft brush.
- Clean the interior with a warm, damp cloth or sponge. Use mild soap.
- For persistent odors, add household bleach or baking soda to the washing solution.
- Leave the lid open for several hours after cleaning to allow the interior to dry.
- For long-term storage, place a container of baking soda or charcoal inside to absorb odors.
Precautions
- Operate on 12V DC only. Do not connect to 110/120V AC without the optional Koolatron PowerPack.
- Do not operate in direct sunlight or hot, enclosed areas like car trunks.
- Ensure ventilation areas are not blocked.
- Aluminum fins will be hot in heating mode and after extended cooling use; allow to cool before handling.
Warranty and Service
This product is warranted for 1 year from the date of retail purchase against defects in material and workmanship. For assistance, contact 1-800-265-8456 or email [email protected].
Manufacturer information
Michelin
Practical help
Common problems
Cooler not cooling or heating
Check that the cigarette lighter socket is clean and free of tobacco or dirt. Ensure the plug is pushed firmly into the socket.
Persistent odors inside the cooler
Clean the interior with a mild soap solution. If odors remain, add household bleach or baking soda to the solution. Leave the lid open for several hours to dry.
Unit not working when vehicle is off
The cooler should not be operated for more than 4 hours when the vehicle is not running to avoid discharging the battery.
Before use
- Pre-cool the unit and contents before placing them inside.
- Ensure the cigarette lighter socket is clean.
- Check that the slider switch is in the correct position (Right for Cool, Left for Heat).
- Ensure ventilation areas are not blocked.
- Verify you are using a 12V DC power source.
Specs in practice
- Cooling Performance
- Cools to approximately 40°F (22°C) below ambient temperature.
- Heating Performance
- Heats to approximately 135°F (57°C) inside.
- Power Consumption
- Approximately 4.5 amps.
Images and diagrams
- Slider switch: Right for cooling (Green light), Left for heating (Red light), Center for OFF (No light).
Model compatibility
- Designed for 12V DC operation only.
- Requires optional Koolatron PowerPack for 110/120V AC wall outlet use.
- Do not use other AC adapters as this may invalidate the warranty.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.