Lighting / LED Lamps
Philips TrueForce LED Industrial and Retail Mains 140W
Quick guide for the Philips TrueForce LED Industrial and Retail Mains 140W highbay lamp. Includes technical specifications, installation compatibility, and performance data.
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
The Philips TrueForce LED Industrial and Retail Mains 140W lamp is designed as a direct retrofit solution for High Intensity Discharge (HID) lamps in high-bay applications. It allows for energy efficiency and long-term savings without the need to replace existing fixtures or EM ballasts. Ensure your existing system uses a 250W or 400W EM ballast before installation.
Product Overview
This LED lamp is engineered for industrial and retail environments such as warehouses, factories, shops, and transport hubs. It provides a pleasant white light with a Color Rendering Index (CRI) of 80 and features a nominal lifetime of 50,000 hours.
Installation and Compatibility
The lamp is designed for direct replacement of HID alternatives. Key compatibility requirements include:
- Ballast Compatibility: Compatible with both 250W and 400W EM gear systems.
- Base Type: E40 cap-base.
- Retrofit: Direct lamp replacement without changing the fixture or EM ballast.
Technical Specifications
- Power Consumption: 140 W
- Luminous Flux: 20,000 lm
- Color Rendering Index (CRI): 80
- Nominal Lifetime: 50,000 hours
- Surge Protection: 4KV
- Starting Time: 0.5 seconds
- Dimmable: No
Operating Conditions
The lamp is designed to operate within specific environmental parameters:
- Ambient Temperature Range: -20°C to +45°C
- T-Case Maximum: 57°C
- Input/Line Frequency: 50 to 60 Hz
Manufacturer information
Philips
Practical help
Common problems
Lamp does not operate after installation
Verify that the existing EM ballast is either 250W or 400W. The lamp is not compatible with other ballast types.
Lamp overheating or premature failure
Ensure the ambient temperature does not exceed +45°C and the T-Case temperature remains within limits.
Before use
- Verify the existing fixture uses an EM ballast.
- Confirm the ballast wattage is either 250W or 400W.
- Ensure the socket base is E40.
- Check that the installation environment is within the -20°C to +45°C temperature range.
- Confirm the application is suitable (warehouses, factories, shops, transport hubs).
Images and diagrams
- The dimensional drawing shows the lamp height (C) is 290 mm and the diameter (D) is 250 mm.
Model compatibility
- Compatible with 250W and 400W EM gear systems.
- Not dimmable.
- Designed for E40 base sockets.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.