Lighting / LED Lamps
User Manual for Tecnolite 65LHBGLED65MVN LED Lamp
Quick guide for the Tecnolite 65LHBGLED65MVN LED lamp. Includes installation instructions, electrical specifications, safety warnings, and maintenance tips.
Table of contents
Quick guide from the manual
This document provides essential instructions for the installation and safe operation of the Tecnolite 65LHBGLED65MVN LED lamp. Always ensure the power supply is disconnected before performing any installation or maintenance tasks. Maintain a minimum distance of 0.5 meters from any flammable materials to prevent fire hazards.
Installation
The installation process involves securing the lamp into an E27 socket. Ensure the power is completely turned off at the circuit breaker before attempting to install or replace the lamp. Use a clean rag or gloves when handling the lamp to avoid burns or contamination.
Safety Warnings
- Power Disconnection: Always disconnect the power supply before installation or maintenance.
- Fire Hazard: Keep the lamp at least 0.5 meters away from any combustible or flammable materials.
- Handling: The lamp and its parts may become hot during operation. Allow the lamp to cool down before handling.
- Usage: This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless supervised.
Maintenance
To ensure the longevity of the lamp, clean the unit and its parts periodically using a dry rag. Do not use harsh chemicals or abrasive materials.
Technical Specifications
- Model: 65LHBGLED65MVN
- Voltage: 100 V ~ 277 V
- Frequency: 50/60 Hz
- Power: 65 W
- Current: 0.23 A
- Base Type: E27
Warranty
Tecnolite offers a limited warranty for their products. LED lamps are covered for 5 years, self-ballasted compact fluorescent lamps for 2 years, and smart devices for 1 year. The warranty is void if the product is used in abnormal conditions, installed with a bulb of higher wattage than specified, or if the electrical installation does not comply with local standards.
Manufacturer information
Tecnolite
Practical help
Common problems
Lamp does not turn on
Verify that the power supply is connected and the lamp is properly screwed into the E27 socket.
Risk of fire or overheating
Ensure the lamp is installed at a minimum distance of 0.5 meters from any flammable materials.
Before use
- Ensure the power supply is disconnected before installation.
- Verify that the electrical supply matches the 100V-277V range.
- Use clean gloves or a rag to handle the lamp to prevent burns.
- Check that the socket is compatible with the E27 base.
Images and diagrams
- The installation diagram illustrates the correct way to handle and screw the lamp into the socket while emphasizing the need to disconnect power first.
Model compatibility
- Compatible with E27 base sockets.
- Not suitable for use with bulbs of higher wattage than specified.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.