RØDE 0573T Wireless Microphone System User Guide

Quick guide from the manual

This document provides the essential steps to set up and start using your RØDE Wireless Microphone System. For advanced settings, firmware updates, and detailed information, please download the RØDE Central app at rode.com/apps/rode-central or visit the full user guide at rode.com/user-guides/wireless-micro.

Initial setup and pairing

1. Remove both transmitters from the charging case.
2. Remove the protective stickers covering the charging pins on the transmitters.
3. Return the transmitters to the charging case.
4. Remove both transmitters from the case again; their LEDs will begin to flash, indicating they are powered on.
5. Remove the receiver from the case and connect it directly to your phone. The receiver LEDs will flash while pairing and remain solid once successfully paired.
6. You are now ready to start recording.

Safety information

• Read all instructions and the safety guide completely before use.
• Do not open the product housing, as this will void the warranty.
• Keep the product away from liquids and electrically conductive objects not required for operation.
• Do not use solvents or corrosive cleaning agents.
• The internal battery should only be replaced by a skilled professional.
• Refer all service and repairs to RØDE-approved personnel.
• Do not listen at high volume levels for long periods to prevent hearing damage.

Technical specifications

The system operates on a 2.4 GHz frequency range (2.402 - 2.480 GHz) with a maximum output power of less than 10dBm. The power requirement for the device is 5VDC, 0.5A.