Home / Electrical Accessories
Simon 75 Push Button Switch 10A 250V
Installation and technical guide for the Simon 75 push button switch (Ref. 75152-39). Includes wiring diagrams, compatibility, technical specifications, and mounting instructions.
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
The Simon 75 push button switch (Ref. 75152-39) is a 10A, 250V electrical mechanism designed for flush or surface mounting. It is compatible with specific Simon frame series (82 Detail, 82 Nature, 82, and 88). Installation requires a universal mounting box and cables with a cross-section between 1.5mm and 2.5mm. The device uses a push-in connection system, requiring 11mm of wire stripping.
Product Description
This device is a single-pole push button switch made of thermoplastic material. It features a push-in connection terminal for quick and secure installation. It is designed for indoor use with an IP20 protection rating.
Technical Specifications
- Rated Current: 10 A
- Rated Voltage: 250 V~
- Protection Rating: IP20
- Operating Temperature: 5 - 40 °C
- Storage Temperature: -25 - 50 °C
- Cable Cross-section: 1.5 mm to 2.5 mm
- Wire Stripping Length: 11 mm
- Connection Type: Push-in (fast connection)
Installation and Maintenance
The switch is designed for universal flush mounting or surface mounting using a compatible box. Ensure the power is disconnected before starting any installation work.
- Prepare the electrical wiring by stripping 11mm of insulation from the cable ends.
- Insert the wires into the push-in terminals.
- Secure the mechanism into the universal mounting box.
- Attach the compatible frame (Simon 82 Detail, 82 Nature, 82, or 88).
Wiring Diagrams
The manual provides various wiring configurations for Simon mechanisms. For the standard push button switch, ensure the phase (L) is connected according to the specific diagram for your circuit type. Refer to the diagrams on pages 4-7 for specific configurations, including single-pole, 2-way, and intermediate switching setups.
Compatibility
This mechanism is compatible with the following frame series: Simon 82 Detail, Simon 82 Nature, Simon 82, and Simon 88.
Manufacturer information
Simon
Practical help
Common problems
Switch does not fit the frame
Verify that you are using a compatible frame series: Simon 82 Detail, Simon 82 Nature, Simon 82, or Simon 88.
Wire does not stay in the terminal
Ensure the wire is stripped exactly 11mm and inserted fully into the push-in terminal.
Before use
- Ensure the electrical circuit is disconnected.
- Verify the cable cross-section is between 1.5mm and 2.5mm.
- Check that the mounting box is a universal type.
- Confirm the voltage does not exceed 250V~.
Images and diagrams
- L: Represents the Live (Phase) wire.
- N: Represents the Neutral wire.
- Phase bridging: Indicates a jumper connection used when multiple switches are installed in a group.
Model compatibility
- Compatible with Simon 82 Detail, Simon 82 Nature, Simon 82, and Simon 88 frames.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.