Lighting / LED Drivers
Skydance LV 0-1-10V LED Dimming Driver
Quick guide for the Skydance LV 0-1-10V LED Dimming Driver. Includes wiring diagrams, installation specifications, and technical parameters for 0/1-10V dimming systems.
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
The Skydance LV is a 1-channel 0/1-10V LED dimming driver designed for constant voltage LED lighting. To ensure proper operation, please note the following critical limitations:
- Wiring Length: The maximum length of wires from the dimmer to the LED driver should not exceed 50 meters.
- Capacity: It is recommended that the number of LED drivers connected to a single 0/1-10V dimmer does not exceed 50 pieces.
- Compatibility: The device is compatible with active or passive 0-10V, 1-10V dimmers, 10V PWM, and RX (4-in-1) systems.
Product Overview
The LV driver converts 0/1-10V input signals into a PWM constant voltage output. It features a logarithmic dimming curve, which is designed to provide a dimming experience that is comfortable for the human eye, ranging from 0% to 100%.
Wiring and Installation
The device requires a connection between the 0/1-10V dimmer, a constant voltage power supply (5-36VDC), and the LED strip. Ensure that the input and output polarities (+/-) are strictly followed during installation. The unit is designed for indoor use with an IP20 rating.
Technical Parameters
- Input Voltage: 5-36VDC
- Input Current: 8.5A
- Output Voltage: 5-36VDC
- Output Current: 1 Channel, 8A
- Output Power: 40W/96W/192W/288W (depending on 5V/12V/24V/36V input)
- PWM Frequency: 500Hz
- Operating Temperature: -30°C to +55°C
- Case Temperature (Max): +85°C
Safety and Protection
The driver includes built-in protection against reverse polarity and short circuits. It complies with EN 62479:2010, EN 62368-1:2020+A11:2020, and relevant ETSI EMC standards.
Manufacturer information
Guangzhou Skydance Co., Ltd.
Practical help
Common problems
Dimming not working or flickering
Verify that the dimmer is compatible (0/1-10V, 10V PWM, or RX). Ensure the wire length between the dimmer and the driver does not exceed 50 meters.
System overload
Ensure that no more than 50 LED drivers are connected to a single 0/1-10V dimmer.
Before use
- Verify that the power supply voltage (5-36VDC) matches the requirements of your LED strip.
- Ensure the dimmer type is compatible (0/1-10V, 1-10V, 10V PWM, or RX).
- Check that wire gauge is appropriate for the terminal blocks (0.5-2.5mm²).
- Confirm correct polarity (+/-) for both input and output connections.
- Ensure the installation environment is dry (IP20 rating).
Specs in practice
- Input Voltage (5-36VDC)
- The range of DC voltage the driver can accept from the power supply.
- Output Current (8A)
- The maximum current the driver can deliver to the LED strip.
- Dimming Curve (Logarithmic)
- The dimming output follows a logarithmic scale, which mimics how the human eye perceives brightness changes.
Images and diagrams
- The wiring diagram illustrates the signal path from the 0/1-10V dimmer to the driver, and the power path from the power supply to the driver and LED strip.
- The mechanical structure diagram provides the physical dimensions (97mm x 33mm x 18mm) required for mounting.
Model compatibility
- Compatible with active or passive 0-10V and 1-10V dimmers.
- Supports 10V PWM and RX (4-in-1) dimming systems.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.