Lighting / Fixtures
SLV HELIA 30 10W Pendant LED Lamp Disposal and Maintenance Guide
Official instructions for the removal of the light source and control gear for disposal of the SLV HELIA 30 10W pendant LED lamp.
Table of contents
Product Overview
The SLV HELIA 30 10W pendant LED lamp is a professional lighting fixture designed for interior use. This document provides specific technical guidance on the disassembly of the unit for the purpose of end-of-life disposal, specifically focusing on the removal of the light source and the control gear.
Disposal and Recycling
In accordance with the European WEEE directive, this product must not be disposed of with regular household waste. It contains electrical and electronic components that require specialized handling. Users are instructed to bring the device to local collection points designated for the recycling of electrical and electronic equipment.
Removal of Components
The provided technical diagram illustrates the step-by-step procedure for accessing and removing the internal components:
- Light Source Removal: The process involves unscrewing the lower housing components (steps 5, 6, and 7) to access the light source module.
- Control Gear Removal: The main housing must be opened by removing the side screws (steps 1 and 2). Once the casing is removed, the internal control gear can be accessed and detached using a screwdriver (steps 3 and 4).
Ensure the power supply is completely disconnected before attempting any disassembly. If you are unsure about the procedure, consult a qualified electrician to prevent damage to the fixture or personal injury.
Manufacturer information
SLV Lighting Group GmbH
Practical help
Common problems
Product disposal
Do not dispose of in household waste. Take to a local WEEE-compliant collection point for electrical and electronic equipment.
Before use
- Ensure the power supply is completely disconnected from the mains.
- Verify you have a suitable screwdriver for removing the housing screws.
- Ensure the lamp has cooled down completely before handling.
Specs in practice
- WEEE Directive
- Waste Electrical and Electronic Equipment regulation requiring specialized recycling.
Images and diagrams
- Steps 1-2: Removing the side screws to open the main housing.
- Steps 3-4: Accessing and removing the internal control gear.
- Steps 5-7: Disassembling the lower section to access the light source.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.